Abstract:Aiming at the problem that the cross helically wound steel wires reinforced polyethylene composite pipe(abbreviated as SRCP)can not be used in open air and the maximum pressure bearing capacity is 3.5 MPa, which can not meet the application in high- pressure field, a compound for ultraviolet(UV) resistant was prepared, and an UV resistant SRCP with the maximum pressure bearing capacity of 7.0 MPa was developed. The configuration of reinforcing steel wire was designed by force balance method. The pressure bearing capacity of SRCP was verified by hydrostatic pressure test at 20 ℃, 60 ℃ and bursting pressure test. The UV resistance effect of the compound was tested by UV aging test. The results show that 400 steel wires with a diameter of 1.2 mm were used in the four-layer steel wire winding reinforcement structure to prepare the high-pressure SRCP. The SRCP has passed the hydrostatic test at 20 ℃, 14 MPa, 1 h and 60 ℃, 8.4 MPa,165 h, and the bursting pressure reaches 21.9 MPa, indicating that the pressure of the SRCP reaches the design pressure of 7.0 MPa. After 336 h UV aging test, the retention rate of mechanical properties of the UV resistant compound is more than 80%, indicating that the UV resistant compound has good UV resistance effect.