Abstract:Cationic photocurable materials usually have low shrinkage, chemical stability, high performance. To develop the technology of cationic photocuring ink direct writing (DIW), a series of cationic photocuring ink using bisphenol A diglycidyl ether (DGEBA) as main resin were developed through thixotropic agent, photoinitiator and active diluent. The printability and mechanical properties of the inks were studied. The results show that the addition of SiO2 can effectively adjust the rheological properties of ink to meet the requirements of DIW printing. The curing speed of the ink is the fastest when the addition amount of the photoinitiator system composed of 2-isopropyl thioxanthone (ITX) and diphenyl iodonium hexafluorophosphates (IOD) (mole ratio of 1:1) is 3% . The tensile properties show that the elongation at break of the printed spline increases with the increase of OXT-BZ diluent content, and the tensile strength remains above 40 MPa, showing excellent mechanical properties. Through the load test of the printing groove ring device, it is found that the ink has excellent adhesion to glass, aluminum alloy and other substrates, and can realize the load of 8 kg, showing excellent mechanical properties.