Abstract:Nano silver particles, nano silver wires and micro silver sheets were prepared by alcohol-thermal method, which were combined in multiple dimensions as composite conductive fillers. The waterborne polyurethane/acrylate composite resin (WPUA) was used as carrier and bonding phase, and the waterborne resin based multi-dimensional lowtemperature curing conductive silver paste was prepared by stirring and mixing method. Transmission electron microscope, scanning electron microscope, water contact angle test and resistance test were used to study the effects of different curing temperatures on the mechanical properties, electrical conductivity and hydrophilicity/hydrophobicity of the conductive silver paste after film formation. The results show that with the increase of curing temperature, the hardness, adhesion and water resistance of the silver paste paint film gradually increase. The hardness of WPUA based silver paste paint film can reach 3H grade at 120 ℃, the adhesion can reach grade 1 at 100 ℃, and the water contact angle can reach 93° at 140 ℃; the resistivity of WPUA silver paste paint film increases first and then decreases with the increase of curing temperature, and the resistivity is 0.19×10-3 Ω?cm when the curing temperature is 160 ℃. The multidimensional composite conductive silver paste prepared in this paper has great potential applications in the field of flexible electronic printing.