乳液模板法制备聚酰亚胺中空微球及其形貌调控
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(22035007)


Morphology Control and Preparation of Polyimide Hollow Microspheres by Emulsion Template Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚酰胺酸(PAA)为前驱体、甲基硅油(SO)为油相、乙醇和水作为沉淀剂,采用乳液模板法制备了聚酰亚胺(PI)中空微球。重点研究了沉淀剂中乙醇的比例、PAA溶液的固含量及PAA溶液/SO体积比对微球粒径和形貌的影响;采用光学显微镜、扫描电镜、红外光谱和热重分析仪对微球的形成过程、粒径和形貌、化学结构和热稳定性进行了表征。当沉淀剂中乙醇/水体积比为1:1、PAA溶液固含量为6%、PAA溶液/SO体积比为1:1时,PI微球的粒径为4.75 μm。制备出的PI中空微球均具有较好的热稳定性,其起始热分解温度为442 ℃。

    Abstract:

    Polyimide hollow microspheres were prepared by emulsion template method using polyamic acid(PAA) as precursor, methyl silicone oil(SO) as oil phase, ethanol and water as precipitant. The effects of the proportion of ethanol in the precipitator, solid content of PAA solution, and volume ratio of PAA solution/SO on the particle size and morphology of the microspheres were studied. The formation process, particle size, morphology, chemical structure and thermal stability of the microspheres were tested by optical microscopy, SEM, FT-IR and thermal gravimetric analyzer (TGA). When the volume ratio of ethanol and water is 1:1, solid content of PAA solution is 6%, and volume ratio of PAA solution and SO is 1:1, the particle size of polyimide microspheres is 4.75 μm. The polyimide hollow microspheres have good thermal stability, and the initial thermal decomposition temperature is 442 ℃.

    参考文献
    相似文献
    引证文献
引用本文

戴 文,王晓东,黄 培,俞 娟.乳液模板法制备聚酰亚胺中空微球及其形貌调控[J].高分子材料科学与工程,2023,39(7):25-32. Wen Dai, Xiaodong Wang, Pei Huang, Juan Yu. Morphology Control and Preparation of Polyimide Hollow Microspheres by Emulsion Template Method[J]. Polymer Materials Science & Engineering,2023,39(7):25-32.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-09-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司