Abstract:Molecular systems of carbon nanotube(CNT) reinforced polyetheretherketone (PEEK)/polytetrafluoroethylene (PTFE) composites with different mass fractions were constructed by molecular dynamics simulation method. The mechanical and tribological properties of the composites were calculated through constant strain method. Functionalized CNTs were used, with functional groups including amino (—NH2), ester (—COOCH3) and carboxyl (—COOH), in order to investigate the reinforcing mechanism of CNTs at the interface of PEEK/PTFE. The simulation results show that the addition of CNTs can improve the mechanical properties of the PEEK/PTFE matrix and reduce the wear rate, with the 3% CNT/10% PEEK/PTFE composite exhibiting the best tribological properties. The incorporation of functionalized CNTs increases the mechanical properties of the composites, and reduces the friction coefficient and wear rate, with the COOH-CNT/PEEK/PTFE composite exhibiting the best tribological properties. 10% PEEK/PTFE, 3% CNT/10% PEEK/PTFE, and 3% COOH- CNT/10% PEEK/PTFE composites were prepared, and the mechanical and tribological properties were tested and compared by scanning electron microscopy to study the tribological mechanism of the CNT/PEEK/PTFE composites. The mechanical properties, friction and wear performance and SEM wear morphology analysis of the three composite materials were tested, and the enhancement effect and action mechanism are consistent with the simulation conclusion. The bidirectional characterization of experiment and molecular dynamic provided a theoretical basis for the development and application expansion of PTFE- based composites.