Abstract:Boron nitride microspheres (GBN) with the particle size of 30 μm and 120 μm were selected as thermally conductive fillers, and hyperbranched polymer-modified boron nitride microspheres (HPEP-GBN) were then prepared through π-π interaction between hyperbranched epoxy (HPEP) and GBN. Then epoxy composites (HPEP-GBN/EP) with different compounding ratios were prepared by a simple blending process. By adjusting the mass fraction of small size GBN (Xs), the influence of the appropriate Xs ratio, the shape of GBN and surface modification on the properties of the epoxy composites were investigated. The results show that, when Xs is 0.4, the HPEP-GBN/EP has the lowest viscosity. The HPEP-GBN/EP composites have a better processability, as well as a higher thermal conductivity than the GBN/EP composites. The filler addition amount of the epoxy composited system could reach to 80%, at this time, the thermal conductivity coefficient of HPEP-GBN/EP composite reaches 5.28 W/(m · K), which is ~ 30 times higher than that of neat EP. In addition, HPEP- GBN/EP composites also exhibit better mechanical properties, thermal stability, lower dielectric loss and thermal expansion coefficient.