改性熔喷吸油材料研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51802216,51873152);天津市自然科学基金资助项目(18JCQNJC76900);天津市教育委员会高等教育科技发展基金(2018KJ196):中国博士后科学基金(2021M691965)


Progress of Modified Melt Blown Oil Absorbing Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    常规的熔喷吸油材料存在吸油倍率低、保油性能较差和强力低等缺点,限制了其作为吸油材料的应用与发展,而通过改性常规熔喷吸油材料来提升其性能的研究受到广泛关注。文中对改性熔喷吸油材料的研究进展进行了全面综述,重点介绍了共混改性、表面改性、复合改性3种改性方法对熔喷吸油材料性能的影响,以及以熔喷吸油材料为基体,通过以上改性方法改变其组分和结构,从而提高材料的吸油倍率、保油率和强力。最后,根据现有吸油材料的发展,对熔喷吸油材料所面临的困难提出了应对策略,展望了其未来的发展方向。

    Abstract:

    Conventional melt blown oil absorbing materials have shortcomings such as low oil absorption efficiency, poor oil retention performance and low strength, which limit their application and development as oil absorbing materials. Thus, the modification of conventional melt blown oil absorbing materials has attracted wide attention. The review gave a comprehensive overview of the research progress of modified melt blown nonwoven oil absorbing materials and focused on the influence of blending modification, surface modification and composite modification on the properties of melt blow oil absorbing materials. It is pointed out that the composition and structure of melt blown oil absorbing materials are changed through the above modification methods, so as to improve performance of melt blown oil absorbing materials such as oil absorbing efficiency, oil retention rate and strength. Finally, the future development directions and countermeasures were put forward according to the difficulties faced by melt blown oil absorbing materials.

    参考文献
    相似文献
    引证文献
引用本文

李 磊,苏静娜,鞠敬鸽,康卫民,黄宇婷,崔宪峰.改性熔喷吸油材料研究进展[J].高分子材料科学与工程,2023,39(7):168-175. Lei Li, Jingna Su, Jingge Ju, Weimin Kang, Yuting Huang, Xianfeng Cui. Progress of Modified Melt Blown Oil Absorbing Materials[J]. Polymer Materials Science & Engineering,2023,39(7):168-175.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-09-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司