Abstract:In this paper, a series of polyimide films with different proportions of diamine were prepared by the polymerization of 3,3', 4,4' - biphenyltetracarboxylic anhydride (BPDA) with 4,4 '- diaminodiphenyl ether (ODA) and 2 - (4- aminophenyl)- 5- aminobenzimidazole (DAPBI). The thermal properties, thermal stability, dynamic mechanical properties and light transmittance of the films with different proportions were characterized by infrared, ultraviolet, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic thermomechanical analysis(DMA) and thermomechanical analysis (TMA). The DMA test results show that with the increase of rigid DAPBI component, the storage modulus of the prepared films gradually increases from 3.5 GPa to 5.9 GPa. At the same time, the coefficient of thermal expansion (CTE) of the films decreases obviously. When the mole ratio of ODA and DAPBI is 4/6 or 5/5, the CTE of the film is closest to 18×10-6 K-1, which is very likely to be used in the field of flexible printed circuit board.