Abstract:cis-Polybutadiene rubber has low strength and needs to be reinforced with carbon black. At the same time, it is easy to burn and has low thermal conductivity, which limits its application range. In this paper, the boron-modified phenolic resin was modified with Fe3+ and embedded in cork powder with honeycomb structure, after that, it catalyzed the formation of graphitized wood charcoal at high temperature, and then adsorbed nickel phosphateto produce FBC-NP. FBC- NP can replace part of the reinforcing agent carbon black (CB), compound with diethylphosphonate aluminum(ADP), and blend with cis-polybutadiene rubber to produce composite materials. The results show that FBC-NP has a higher thermal stability than carbon black. The limiting oxygen index (LOI) of BR is increased from 19.3% to 32.1%, the peak heat release rate (pHRR) is decreased by 38.0% , and total heat release (THR) is decreased by 17.5% . The release of CO and smoke is also inhibited during combustion, because FBC-NP catalyzed the formation of relatively dense carbon layer, which prevented the release of heat, smoke and toxic gases. In addition, biochar can give butadiene rubber a higher thermal conductivity. Finally, the flame retardant mechanism of cis-polybutadiene rubber composite was analyzed.