机床基础件用颗粒增强树脂基自愈复合材料研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51965037,51565030)


Progress of Particle-Reinforced Resin-Based Self-Healing Composite for Machine Tool Base Parts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    钢和铸铁的热稳定性和动态性能不足是影响机床精密加工的主要因素之一,同时矿物复合材料在服役过程中出现的非预期断裂、过度磨损和表面腐蚀等损伤也成为影响机床寿命和可靠性的主要问题。针对精密机床基础件对动态性能的要求和损伤的早期感知与防治问题,提出开发应用于机床基础件的颗粒增强树脂基自愈复合材料。文中首先综述了机床常用材料的发展现状,其次介绍了机床用矿物复合材料和复合结构的最新研究成果,最后重点讨论了现有智能自愈材料的自愈机理、优劣势和局限性。基于研究成果综述,总结了当前颗粒增强树脂基自愈复合材料开发面临的挑战:(1)微观-细观-宏观层面的跨尺度分析、设计理论和模拟方法;(2)微胶囊在全生命周期中抗裂性、可裂性的定向设计和特殊工况下的止裂性问题;(3)损伤竞争耦合条件下构建材料内部微裂纹应力场和位移场数学模型。

    Abstract:

    The insufficient thermal stability and dynamic performance of steel and cast iron are one of the main factors affecting the precision machining of machine tools. At the same time, unintended fractures, excessive wear and surface corrosion of mineral composites during service have also become the main problems affecting the life and reliability of machine tools. Aiming at the requirements for dynamic performance and the early perception and prevention and control of damage of precision machine tool basic parts, the development of particle- reinforced resin-based self- healing composite for machine tool foundations was proposed. Firstly, the development status of common materials for machine tools was summarized. and then, the latest research results of mineral composite materials and composite structures for machine tools were introduced. Finally, the self-healing mechanism, advantages, disadvantages and limitations of existing intelligent self-healing materials were mainly discussed. Based on the review of the research results, the challenges faced in the development of particle- reinforced resin-based self- healing composite for machine tool basic parts were summarized: (1) cross- scale analysis, design theory and simulation methods at the micro-meso-macro level; (2) the directional design of microcapsules for non-anticipated rupture, anticipated release of repair agents throughout the life cycle, as well as the anti-cracking problem under special working conditions; (3) the mathematical model for constructing the stress field and displacement field of microcracks in materials under the condition of damage competitive coupling.

    参考文献
    相似文献
    引证文献
引用本文

尹海鹏,李有堂,李武强,黄 华.机床基础件用颗粒增强树脂基自愈复合材料研究进展[J].高分子材料科学与工程,2023,39(8):156-164. Haipeng Yin, Youtang Li, Wuqiang Li, Hua Huang. Progress of Particle-Reinforced Resin-Based Self-Healing Composite for Machine Tool Base Parts[J]. Polymer Materials Science & Engineering,2023,39(8):156-164.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-10-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司