不同共聚组成聚己二酸丁二醇酯-对苯二甲酸丁二醇酯的制备及相对分子质量
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51103135);浙江省人才项目(2019R52012)


Preparation and Molecular Weight Characterization of Polybutylene Adipate-Butylene Terephthalate with Different Copolymerization Components
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚己二酸丁二醇酯-对苯二甲酸丁二醇酯(PBAT)是目前最常用的可生物降解塑料之一,但在对其开展的研究中,缺乏对相对分子质量测定的详细探讨。文中通过合成共聚组成可控的PBAT,研究了PBAT的结构对其相对分子质量测定的影响规律。在使用尺寸排除色谱法测定相对分子质量的过程中,采用良溶剂二氯甲烷替代常用的四氢呋喃,可避免因溶解度低引起的双峰结果的干扰,实现不同共聚组成PBAT相对分子质量的准确测定。此外,首次测定了不同共聚组成PBAT的折光指数增量,并将其用于超高效聚合物色谱-多角度激光光散射仪-示差检测器联用中,测定了PBAT的绝对分子量;将所测绝对重均分子量与特性黏度拟合,得到Mark-Houwink方程的相关参数a=0.74,K=4.33×10-4。基于优化后的相对分子质量测定手段,研究了所测得的PBAT相对重均分子量与绝对重均分子量的关系。其工作丰富了PBAT的相对分子质量测定手段,揭示了PBAT结构和溶剂对相对分子质量测定的影响方式,对PBAT的相对分子质量表征具有重要的借鉴意义,有助于更深入地理解PBAT相对分子质量对其性能及应用的影响。

    Abstract:

    Polybutylene adipate- butylene terephthalate (PBAT) is one of the most commonly used biodegradable plastics, and there is a lack of detailed investigation of the molecular weight determination for PBAT. In this work, a series of PBAT with different components were synthesized to investigate the influence of PBAT structure on its molecular weight determination. In the determination of the relative molecular weight of PBAT by size exclusion chromatography, the utilization of dichloromethane, a good solvent, instead of tetrahydrofuran can avoid the interference of the bimodal results caused by the low solubility of PBAT in tetrahydrofuran, allowing an accurate determination ofthe relative molecular weight for PBAT with different components. In addition, the refractive index increments of PBAT with different components were measured for the first time. With the measured refractive index increments, the absolute molecular weight of PBAT can be determined by an advanced polymer chromatography- multi- angle laser scattering-refractive index detector. The measured absolute molecular weights were fitted with the intrinsic viscosity of PBAT using the Mark-Houwink equation to obtain the correlation parameters (a=0.74, K=4.33×10-4). Based on the optimized methods for molecular weight characterization in this work, the relationship between the measured relative molecular weight and absolute molecular weight of PBAT was studied. This work provides new prospectives for molecular weight characterization of PBAT by varying its components, which enriches molecular weight measurement methods and contributes to a comprehensive understanding for PBAT structure.

    参考文献
    相似文献
    引证文献
引用本文

李露露,张成峰,张先明.不同共聚组成聚己二酸丁二醇酯-对苯二甲酸丁二醇酯的制备及相对分子质量[J].高分子材料科学与工程,2023,39(9):19-26. Lulu Li, Chengfeng Zhang, Xianming Zhang. Preparation and Molecular Weight Characterization of Polybutylene Adipate-Butylene Terephthalate with Different Copolymerization Components[J]. Polymer Materials Science & Engineering,2023,39(9):19-26.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-11-13
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司