Abstract:A versatile method, based on the patterned surface assisted metal selective deposition, was developed for fabricating Cu patterns in this study. The polydopamine (PDA) adhesive layer was applied for the covalent immobilization of atom transfer radical polymerization (ATRP) initiator on silicon substrate. With 2-(methacryloyloxy) ethyl trimethylammonium chloride (METAC) as monomer, the patterned poly(2- (methacryloyloxy)ethyl trimethylammonium chloride) (PMETAC) brushes were generated by employing digital mirror device (DMD)- based light modulation technique to regulate the ATRP process. The chemical composition, geometric structure and surface morphology of the resulting patterns were characterized by X- ray photoelectron spectroscopy, optical microscopy and atomic force microscopy, the results indicate the successful fabrication of patterned PMETAC brushes. With the patterned PMETAC brushes as template, the immobilization of metal catalyst was achieved through the ionic exchange between the positively charged quaternary ammonium groups at the side chains of PMETAC brushes and metal anions [PdCl4]2?, leading to the selective deposition of copper. The electrical properties of Cu patterns with different sizes were studied and an experiment in which the wires are connected through a copper pattern on the surface of silicon wafer to light up a light-emitting diode was designed. The results demonstrate that the copper pattern obtained by this method shows excellent electrical conductivity. The research provides fundamental technical support for expanding the application of patterned polymer brushes assisted metal deposition technology in complex circuit preparation.