高效高强挤出增材制造技术研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52206095);山东省自然科学基金资助项目(ZR2021QE232)


Progress of High Productivity and High Strength Extrusion-Based Additive Manufacturing Technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    增材制造技术在按需制造、个性定制、异形构件等领域具有明显优势,是先进制造技术的重要研究方向。与传统制造方法(如减材制造、注塑成型)相比,增材制造制品的力学性能通常较差且生产效率较低,限制了其更广泛地应用于适应复杂工况的承载部件。作为制造技术关键评价的速度、质量指标,始终引领着宏微观尺度挤出增材制造技术发展方向。由于逐层逐步增材制造的固有模式,强度差和效率低成为困扰其工程应用的两大挑战。文中从挤出打印层间结合机理、层间断裂机制两方面讨论了研究学者在改善3D打印强度方面的努力,以及在提高打印效率方面的最新进展;最后综述了创新发展的几种注射打印前沿技术,讨论了其技术原理、创新特点和优劣势,将注射成型工艺引入增材制造技术中,有望成为解决两大难题的有效技术途径,为未来挤出增材制造的研究及推动形成新的技术方案提供参考。

    Abstract:

    Additive manufacturing has distinct advantages in the fields of on- demand manufacturing, personalized customization, special- shaped components, etc. It is an important research direction of advanced manufacturing technology. Compared with traditional manufacturing methods (such as subtractive manufacturing and injection molding), the mechanical properties of additive manufacturing products are generally poor and the production efficiency is low, which limits their wider application to load-bearing parts that adapt to complex working conditions. As the key evaluation index of manufacturing technology, the productivity and quality indicators always lead the development direction of macro/micro scale extrusion-based additive manufacturing technology. Due to the inherent mode of layer by layer incremental manufacturing, poor strength and low efficiency have become two major challenges that limit its engineering application. In this paper, the efforts of researchers in improving 3D printing strength of extrusion- based printing were discussed from the aspects of interlayer bonding mechanism and interlayer fracture mechanism of 3D printing; and the latest progress in improving printing efficiency was reported; finally, several innovative and developing injection printing cutting- edge technologies were reviewed, and their technical principles, innovative characteristics, advantages and disadvantages were analyzed. The introduction of injection molding technology into additive manufacturing technology is expected to become an effective technical approach to solve the two major problems, providing a reference for future research on extrusion additive manufacturing and promoting the formation of new technical solutions.

    参考文献
    相似文献
    引证文献
引用本文

朱家威,黄士争,潘 威,Mohini Sain,杨卫民,鉴冉冉.高效高强挤出增材制造技术研究进展[J].高分子材料科学与工程,2023,39(9):158-165. Jiawei Zhu, Shizheng Huang, Wei Pan, Mohini Sain, Weimin Yang, Ranran Jian. Progress of High Productivity and High Strength Extrusion-Based Additive Manufacturing Technology[J]. Polymer Materials Science & Engineering,2023,39(9):158-165.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-11-13
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司