硅磷双改性环氧树脂的合成及阻燃性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52273080,12202325);中央高校基本科研业务费专项资金(WUT2021IVA068)


Synthesis and Flame Retardancy of Silicon and Phosphorus Modified Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    磷改性环氧的极限氧指数高但会降低力学性能且抑烟效果不明显,硅改性环氧具有增韧和耐温的特性但其极限氧指数偏低。为了满足工程应用对环氧树脂防火安全性和力学性能的要求,采用硅磷协同阻燃改性得到综合性能优异的树脂。文中用聚苯基丙基硅氧烷(Z-6018)和10-(2,5-二羟基苯基)-10-氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO-HQ)作为载体,通过化学接枝将硅磷元素引入到环氧树脂中,制得硅改性环氧树脂(B-30)、磷改性环氧树脂(P-27)和硅磷双改性环氧树脂(B-P),并通过红外光谱确认化学结构。通过拉伸试验、热失重、极限氧指数、锥形量热、扫描电镜和X射线光电子能谱等方法研究了树脂的力学性能、阻燃性能、阻燃机制和抑烟机制。B-P的拉伸强度为75.0 MPa,较E-51,P-27和B-30分别提升15.4%,67.7%和44.2%。而与E-51相比,P-27和B-30拉伸强度降低,这体现了“脆”和“韧”共混时的强度协同作用。通过阻燃性能测试可知B-P各自继承了B-30显著的抑烟性和P-27较高的LOI,对点燃和播焰性没有协同作用。B-P燃烧后残留硅磷元素量显著大于单独改性树脂,且残留物外观综合了硅磷单独改性的特征,形成了一种致密坚硬微观复合结构,体现了成份和结构的协同作用。

    Abstract:

    The oxygen index of phosphorus modified epoxy is high, but the mechanical properties are reduced and the smoke suppression effect is not obvious. The silicon modified epoxy has the characteristics of toughening and temperature resistance, but its oxygen index is low. In order to meet the requirements of fire safety and mechanical properties of epoxy resin in engineering applications, the resin with excellent comprehensive properties was obtained by silicon phosphate co- flame retardant modification. In this paper, polyphenylpropyl siloxane (Z- 6018) and 10- (2,5-dihydroxyphenyl) -10-hydrogen-9-oxa-10-phosphorus-phene-10-oxide (DOPO-HQ) were used as carriers to introduce silicon phosphorus elements into epoxy resin by chemical grafting. Silicon-modified epoxy resin (B-30), phosphorus-modified epoxy resin (P- 27) and silicon- phosphorus- modified epoxy resin (B- P) were prepared, and their chemical structures were confirmed by infrared spectroscopy. The mechanical properties, flame retardant properties, flame retardant mechanism and smoke suppression mechanism of the resins were studied by tensile test, TGA, LOI, CCT, SEM and EDS. The tensile strength of B-P is 75.0 MPa, which is 15.4%, 67.7% and 44.2% higher than that of E-51, P-27 and B-30, respectively. However, compared with E-51, P-27 and B-30 have reduced tensile strength, which reflects the strength synergy of "brittle" and "tough" blending. The flame retardant performance test shows that B-P inherits the significant smoke suppression of B-30 and higher LOI of P-27 respectively, and has no synergistic effect on ignition and flame seeding. The amount of residual silicon and phosphorus elements after combustion of B-P is significantly greater than that of single modified resin, and the appearance of residue combines the characteristics of single modified silicon and phosphorus, forming a compact and hard micro composite structure, which reflects the synergistic effect of composition and structure.

    参考文献
    相似文献
    引证文献
引用本文

曹东风,刘江波,冀运东,胡海晓,陈新昌,李晨阳,陈 震,李书欣.硅磷双改性环氧树脂的合成及阻燃性能[J].高分子材料科学与工程,2023,39(10):40-50. Dongfeng Cao, Jiangbo Liu, Yundong Ji, Haixiao Hu, Xinchang Chen, Chenyang Li, Zhen Chen, Shuxin Li. Synthesis and Flame Retardancy of Silicon and Phosphorus Modified Epoxy Resin[J]. Polymer Materials Science & Engineering,2023,39(10):40-50.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-12-31
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司