聚烯烃弹性体的熔体流动速率和含量对聚丙烯树脂改性的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(22273064)


Effect of Polyolefin Elastomer Melt Flow Rate and Content on Polypropylene Resin Modification
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用2种不同熔体流动速率的聚烯烃弹性体(POE)为原料,详细研究了其不同含量对2种不同聚丙烯树脂(PP,其中PP-1为普通级聚丙烯树脂,PP-2为高抗冲聚丙烯)的增韧改性效果。首先,将PP和POE按照不同比例进行共混复合,用切粒机切粒并经模具制成样条,然后进行力学性能、熔体流动速率、扫描电子显微镜、热重分析、差示扫描量热法等测试与分析。研究表明,对于2类聚丙烯树脂,熔体流动速率低的POE-1#对高抗冲PP-2树脂的增韧改性效果比普通级PP-1更好,尤其是含量在20%时的冲击强度和断裂伸长率分别为101 kJ/m2和458.8%,相比纯聚丙烯PP-2树脂分别增加了286%和190%;而对于同一种聚丙烯树脂,在POE添加含量低于10%时,熔体流动速率低的POE-1#树脂增韧的复合材料具有更好的热性能和力学性能,同时“岛相”结构更加均匀;在POE添加量高于10%时,熔体流动速率高的POE-2#的增韧效果更优,可为聚丙烯树脂实际应用中的增韧改性提供理论参考。

    Abstract:

    Using two polyolefin elastomers (POE) with different melt flow rate as raw material, the toughening effects of POE with different kinds and contents on two different kinds of PP resins (PP-1 is a common polypropylene resin, PP-2 is a high impact polypropylene resin) were studied in detail. First of all, PP and POE resins were blended at different proportions, sliced with a pelletizer, and made into splines through a mold. Then, it was studied that how to affect the toughness of PP by mechanical property test, melt flow rate test, SEM, TGA, DSC, et al. The results show that POE-1# resin has better toughening effect on PP-2 resin than PP-1, especially when the content is 20% , the impact strength and elongation at break are 101 kJ/m2 and 458.8% , respectively, which are increased up to 286% and 190% compared with pure PP-2 resin. Furthermore, when the POE content is less than 10%, the PP blend toughened by POE-1# resin with low melt flow rate has better mechanical and thermal properties, and the "island phase" structure is more uniform; when the POE content is higher than 10%, POE-2# with high melt flow rate has better toughening effect. The study may provide guidance for the modification of PP in industrial applications.

    参考文献
    相似文献
    引证文献
引用本文

刘 鹏,何 爽,张振康,章晗坤,薛彦虎.聚烯烃弹性体的熔体流动速率和含量对聚丙烯树脂改性的影响[J].高分子材料科学与工程,2023,39(10):68-79. Peng Liu, Shuang He, Zhenkang Zhang, Hankun Zhang, Yanhu Xue. Effect of Polyolefin Elastomer Melt Flow Rate and Content on Polypropylene Resin Modification[J]. Polymer Materials Science & Engineering,2023,39(10):68-79.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-12-31
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司