热氧老化对聚丁烯合金结晶性和力学性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省重点研发计划(重大科技创新工程)(2019JZZY010352);泰山学者工程项目


Effect of Thermal Oxidation Aging on Crystallinity and Mechanical Properties of Polybutene Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中研究了聚丁烯合金(PBA)的热氧老化性能,并与高等规聚丁烯-1(iPB)进行对比。随着100 ℃热氧老化时间的延长,PBA和iPB的熔体流动速率和相对分子质量均变化不大。氧化诱导时间(OIT)表明,PBA样品的OIT随老化时间变化不大,表明其基体的耐热氧老化性优异。差示扫描量热分析结果表明,老化144 h后,iPB的结晶度降低24%,而PBA则变化不大。iPB的拉伸强度变化不大,断裂伸长率呈下降的趋势;PBA的拉伸强度和断裂伸长率均呈现升高的趋势。随着热氧老化时间延长,PBA的应变硬化模量(Gp)升高并趋于稳定,48 h达到最大值,约44.2 MPa。iPB的Gp随老化时间波动相对较大,总体Gp值低于PBA。

    Abstract:

    The thermal oxidative aging properties of polybutylene alloy (PBA) were studied and compared with those of polybutylene (iPB). With the increase of thermo- oxidative aging time at 100 ℃ , the melt flow rate and molecular weight of PBA and iPB have little change. The result of oxidation induction time (OIT) test show that the OIT of PBA sample does not change with aging time, indicating that PBA has excellent thermo-oxidative aging resistance. DSC test results show that the crystallinity of iPB is decreased by 24% after aging, while PBA remains basically unchanged. The tensile strength of iPB changes little, and the elongation at break shows a downward trend. The tensile strength and elongation at break of PBA show an increasing trend. With the increasing of thermo-oxidative aging time, the modulus of strain hardening (Gp) of PBA increases and tends to be stable. The maximum value of Gp is about 44.2 MPa at 48 h. The Gp of iPB is lower than that of PBA.

    参考文献
    相似文献
    引证文献
引用本文

夏鹏程,高艺勇,邵华锋,贺爱华.热氧老化对聚丁烯合金结晶性和力学性能的影响[J].高分子材料科学与工程,2023,39(10):107-112. Pengcheng Xia, Yiyong Gao, Huafeng Shao, Aihua He. Effect of Thermal Oxidation Aging on Crystallinity and Mechanical Properties of Polybutene Alloy[J]. Polymer Materials Science & Engineering,2023,39(10):107-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-12-31
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司