Abstract:The self-healing polyurethane usually has poor high temperature resistance and hydrophobicity, and has the problems of single repair method, isothermal at room temperature and slow repair under conditions, which limit the wide application of self- healing polyurethane. In this paper, the silicone modified polyurethane (SiPU) with infrared light repair function at room temperature was prepared by using polytetrahydrofuran glycol (PTMEG), hydroxyl terminated polydimethylsiloxane (PDMS- OH) and isophorone diisocyanate (IPDI) as prepolymer, 4,4'- thiodianiline (ODD) as rigid chain extender with dynamic disulfide bond, and 4-methylumbelliferone (4-MU) as capping agent with reversible ring structure. The effects of the amount of rigid chain extender ODD containing disulfide bond on the properties of SiPU and effects of hydroxyl terminated polydimethylsiloxane (PDMS- OH) on the heat resistance and hydrophobicity of SiPU were studied. Then the self- made polypyrrole modified carbon nanotubes (PPY/CNTs) were used as conductive filler, which ultrasonically blended with SiPU to prepare a self- healing silicone modified polyurethane (CSiPU) with multiple responsiveness. It is proved by optical microscope (OM), 3D optical interferometer, universal testing machine that SiPU can achieve self- healing under the condition of room temperature (25 ℃) 10 μm infrared light irradiation, and the SiPU3 with the mole ratio of polyol and chain extender of 3:1 has the best repair effect, the total cutting repair efficiency reaches 88%, and the scratch repair efficiency reaches 100%; the thermogravimetric analysis and contact angle measurement show that the introduction of silicone structure improves the thermal stability and hydrophobicity of SiPU; the response behavior of CSiPU to temperature and chemical environment is verified by digital multimeter.