氰酸酯/聚丁二烯环氧树脂形状记忆聚合物的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of Cyanate/Polybutadiene Epoxy Resin Shape Memory Polymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为解决当前多数形状记忆聚合物在应用中存在力学性能及形状回复力不足的问题,文中利用双酚E型氰酸酯与聚丁二烯环氧树脂共固化制备了氰酸酯/聚丁二烯环氧树脂(CE/EHTPB)形状记忆树脂体系。运用傅里叶变换红外光谱、扫描电子显微镜、热失重分析、吸水率测试、动态力学热分析、力学性能测试和形状记忆性能测试等对CE/EHTPB 树脂体系的结构和性能进行了分析,探究了聚丁二烯环氧树脂的含量对体系性能的影响。结果表明,CE/EHTPB形状记忆树脂体系的初始热分解温度在325 ℃以上,吸水率不小于1.612%,具备良好的热稳定性和耐湿性;随着EHTPB含量增加,CE/EHTPB形状记忆树脂体系的韧性增加,冲击强度最高可达13.92 kJ/m2,拉伸强度、弹性模量和弯曲强度逐渐降低至55 MPa,620 MPa和88 MPa;CE/EHTPB形状记忆树脂体系的玻璃化转变温度在164~259 ℃范围内可调,经过10次循环测试后,其形状固定率和形状回复率皆大于97.5%,可广泛应用于空间可展开结构。

    Abstract:

    In order to solve the current problems of insufficient mechanical properties and shape- restoring power of most shape memory polymers in applications, CE/EHTPB shape memory resin systems were prepared with co- curing bisphenol E cyanate(CE) and polybutadiene epoxy resin(EHTPB). Fourier transform infrared spectroscopy, scanning electron microscopy, thermal mass loss analysis, water absorption test, dynamic mechanical, thermal analysis, mechanical property test and shape memory property test were used to characterize the structure and properties of CE/EHTPB resin systems. The effect of the content of polybutadiene epoxy resin on the properties of the systems was investigated. The results show that the CE/EHTPB shape memory resin systems have an initial thermal decomposition temperature above 325 ℃ , water absorption below 1.612% , and good thermal stability and moisture resistance. With the increase of EHTPB content, the toughness of the CE/EHTPB shape memory resin systems is improved, and the impact strength is up to 13.92 kJ/m2. The tensile strength, Young's modulus and flexural strength gradually decrease to 55 MPa, 620 MPa, and 88 MPa respectively. The glass transition temperature of the CE/EHTPB shape memory resin systems is adjustable in the range of 164~259 ℃. After ten cycles of testing, the shape fixing rate and shape recovery rate are more incredible than 97.5%, which can be widely used in space deployable structures.

    参考文献
    相似文献
    引证文献
引用本文

高战蛟,李芝华,杨 煜,郭子腾.氰酸酯/聚丁二烯环氧树脂形状记忆聚合物的制备及性能[J].高分子材料科学与工程,2023,39(10):141-149. Zhanjiao Gao, Zhihua Li, Yu Yang, Ziteng Guo. Preparation and Properties of Cyanate/Polybutadiene Epoxy Resin Shape Memory Polymer[J]. Polymer Materials Science & Engineering,2023,39(10):141-149.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-12-31
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司