低损耗氮杂环聚酰亚胺合成及柔性覆铜板层间胶黏剂的性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金面上基金资助项目(52273065);国家自然科学基金青年基金资助项目(51903028)


Synthesis of Low Loss Nitrogen Heterocyclic Polyimide and Properties of Flexible Copper Clad Laminate Interlayer Adhesive
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对先进通讯领域对高频高速柔性覆铜板(FCCL)的迫切需求,采用含杂萘联苯结构的1,2-二氢-2-(4-氨基苯基)-4-[4-(4-氨基苯氧基)-苯基]-2,3-二氮杂萘-1-酮(DHPZDA)、含柔性基团的4,4'-二氨基二苯醚(ODA)/1,3-双(4-氨基苯氧)苯(TPER)二胺单体以及3种芳香族二酐进行共聚,制备了一系列共聚聚酰胺酸(PAA),热亚胺化后得到热塑性聚酰亚胺(TPI)薄膜胶黏剂。将合成的PAA涂覆在商用聚酰亚胺(MPI)基膜上,热亚胺化得到TPI/MPI复合膜,热压覆合铜箔制备了FCCL。对TPI薄膜的热学、力学、介电性能及吸水率进行了测试,对FCCL进行剥离强度测试。结果表明,TPI薄膜具有良好的热学、力学性能以及优异的介电性能,高频下介电常数为3.05~3.12,介电损耗低至0.003~0.005,吸水率为1.12%~1.34%,与铜箔粘接性较好,FCCL的剥离强度为0.68~0.95 N/mm。该系列热塑性杂萘联苯型聚酰亚胺胶黏剂在5G通讯、大数据计算和人工智能领域具有广阔的应用前景。

    Abstract:

    Urgent demand for high-frequency and high-speed flexible copper clad laminates (FCCL) in the field of advanced communication has been raised recently. Herein, a series of polyamide acids (PAA) were synthesized with 1,2-dihydro- 2- (4- aminophenyl)- 4- [4- (4- aminophenoxy)phenyl]- phthalazin- 1- one (DHPZDA) bearing heteronaphthalene structure, 4,4'- diaminodiphenyl ether (ODA)/1,3- bis(4- aminophenoxy)benzene (TPER) diamine monomer containing flexible groups and three types of aromatic dianhydrides as co- monomer for copolymerization, and the thermoplastic polyimide (TPI) film adhesives were obtained after thermal imidization. The synthesized PAA was coated on a commercial polyimide (MPI) matrix film, and the TPI/MPI composite film was fabricated by thermal imidization as well. Then, the flexible copper clad laminate (FCCL) was prepared by thermal lamination with copper foil cladding. The TPI film was tested for thermal, mechanical, dielectric properties and water absorption, along with the peel strength test for FCCLs. The results indicate that the TPI film exhibit good thermal, mechanical properties and excellent dielectric properties, the dielectric constant at high frequency are 3.05~3.12, the dielectric loss is as low as 0.003~0.005, the water absorption rate is 1.12%~1.34%. Besides, the adhesion with copper foil is steady with a peel strength of 0.68~0.95 N/mm. Thus, such series of thermoplastic heteronaphthalene biphenyl polyimide adhesives have broad application prospects in the fields of 5G communication, big data computing and artificial intelligence.

    参考文献
    相似文献
    引证文献
引用本文

艾 蕊,朱琳艳,张文广,宗立率,李战胜,王锦艳,蹇锡高.低损耗氮杂环聚酰亚胺合成及柔性覆铜板层间胶黏剂的性能[J].高分子材料科学与工程,2023,39(11):1-10. Rui Ai, Linyan Zhu, Wenguang Zhang, Lishuai Zong, Zhansheng Li, Jinyan Wang, Xigao Jian. Synthesis of Low Loss Nitrogen Heterocyclic Polyimide and Properties of Flexible Copper Clad Laminate Interlayer Adhesive[J]. Polymer Materials Science & Engineering,2023,39(11):1-10.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司