Abstract:Through the introduction of air- dried oil to modify waterborne polyurethane wood paint resin, the problems such as poor water resistance, low cross-linking density and easy adhesion of paint film were solved, water resistance of resin can be improved, and surface drying time of paint film can be shortened. Using dry oil fatty acid polyol, polyester and isophorone diisocyanate as raw material, the polyurethane prepolymer was prepared by polycondensation, and then dimethylol propionic acid was added to prepare the hydrophilic chain extension prepolymer; the neutralizer was added to the system, pH value was adjusted to neutral, the deionized water dispersion was added, the chain extender was added, the chain extension continued, and then the dry oil fatty acid polyol modified waterborne polyurethane wood paint resin was prepared. The structure and properties of the emulsion were analyzed by infrared spectrum, emulsion particle size and water resistance test, and the properties of the coating were analyzed by atomic force microscope, transmission electron microscope, contact angle and mechanical properties test. The experimental results show that the particle size of linoleic acid monoglyceride modified wood paint resin emulsion is 65.47 nm, the dispersibility coefficient is 0.186, the UV light transmittance is 85.75%, the surface drying time is obviously shortened, the film water contact angle is 81°, the water absorption is 11.97%, and the water resistance is excellent.