Abstract:In order to meet the requirements of high heat resistance, high mechanical properties and wave permeability of polyetheretherketone (PEEK) special packaging plastics used in special environments, in this paper, glass fibers (GF) and silicon carbide fibers (SiC) were introduced into PEEK by melt blending, and the PEEK composites were prepared by injection molding. The tensile fracture surface morphologies, melting and crystallization behavior, mechanical properties, thermal stability and electromagnetic shielding properties of the composites were studied through electronic scanning microscopy, differential scanning calorimeter, universal testing machine, thermogravimetric analyzer and vector network analyzer. The results show that SiC fiber has good interfacial compatibility with the PEEK matrix, and the mechanical properties of PEEK/SiC composites are better than those of PEEK/GF composites. The tensile breaking strength, modulus and impact strength can reach 130.4 MPa, 7.39 GPa and 14.8 kJ/m2, respectively, which are 67%, 347% and 143% higher than those of pure PEEK. In addition, the PEEK/SiC composites also exhibit excellent thermal stability and good wave permeability. The research results indicate that small size SiC fiber endows PEEK/SiC composites with higher mechanical performance, thermal resistance and wave transmission performance compared with PEEK/GF composites, which provide useful ideas for the research and development of electronic packaging materials used in extreme environment.