Abstract:Natural diatomite (DME) was used as micro-container, and benzotriazole (BTA) corrosion inhibitor was loaded by vacuum impregnation method. At the same time, the pH- responsive Cu2+-BTA complex was coated on the outer surface of BTA@DME to prepare pH- responsive BTA@DME/Cu2+- BTA microcapsules. SEM, EDS and decomplexation experiments prove the successful loading of BTA and the successful coating of Cu2+-BTA layer. The loading rate of BTA in microcapsules is 44.6%. The prepared microcapsules have pH slow-release properties. When the pH is 7 and the Cu2+ concentration is 60 mmol/L, the Cu2+-BTA complex structure is dense, and the BTA release rate in the microcapsules is less than 10% . At pH 5 and 2, the release rate of BTA in microcapsules is 50% and 80% , respectively. The epoxy resin scratch coating with 5% BTA@DME/Cu2+-BTA microcapsules has the best anti-corrosion effect. During the immersion period, the impedance modulus becomes higher and higher, from 2.8×105 Ω· cm2 after 1 d of immersion to 1.36×106 Ω·cm2 after 30 d of immersion.