抗冷流剪切硬化复合胶的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52073086);湖南省重大专项(2021NK1050);国家重点研发计划 (2021YFE0191500);湖南省自然科学基金资助项目(2023JJ60447,2022JJ50053)


Preparation and Properties of Cold Flow Shear Stiffening Composite Gel
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了改善剪切硬化胶(SG)的冷流特性,拓展其应用领域,以硼-氧交联聚硅橡胶SG为基材,通过溶剂共混的方式加入有机高分子吸油材料聚甲基丙烯酸月桂酯(PLMA),制备得到一系列剪切增稠复合胶(P-SG)。研究了PLMA含量对复合胶蠕变性、剪切增稠性、抗冲击性及疏水性的影响。结果表明,随着PLMA含量的增加,P-SG抗蠕变性增强,并且显示出更佳的硬化性能;落锤冲击测试中,P-SG5耗散的能量较纯SG高出32.6%,表现出更优异的抗冲击性能;此外,PLMA的强疏水性使得P-SG的疏水性能进一步提升,有效地拓宽了材料的应用领域。

    Abstract:

    In order to improve the cold flow characteristics of shear stiffening gel (SG) and expand its application field, a series of shear stiffening composite gels(P- SG)were prepared by adding the organic macromolecular oil absorbent poly (lauryl methacrylate) (PLMA) into the boron- siloxane polymer silicone rubber with a low crosslinking degree through solvent blending. The effects of PLMA content on the creep resistance, shear stiffening, impact resistance and hydrophobic properties of P- SG were investigated. The results show that with the increase of PLMA content, the creep resistance of P-SG is enhanced and the hardening property is better. In the drop hammer impact test, the energy dissipated by P-SG5 is 32.6% higher than that of pure SG, reflecting better impact resistance. In addition, due to the strong hydrophobicity of PLMA, the hydrophobic property of P- SG is further improved, thus effectively broadening the application field of materials.

    参考文献
    相似文献
    引证文献
引用本文

李 想,胡嘉炜,刘嘉婷,卢嘉威,李 朔,陈 一.抗冷流剪切硬化复合胶的制备及性能[J].高分子材料科学与工程,2023,39(12):45-51. Xiang Li, Jiawei Hu, Jiating Liu, Jiawei Lu, Shuo Li, Yi Chen. Preparation and Properties of Cold Flow Shear Stiffening Composite Gel[J]. Polymer Materials Science & Engineering,2023,39(12):45-51.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-12-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司