一种环保聚氨酯自沉积防腐涂料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(52203139);江苏省自然科学基金青年基金资助项目(BK20221096);中国博士后基金面上资助(2022M711356)


Preparation and Properties of an Environment-Friendly Polyurethane Self-Deposition Anti-Corrosion Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以阴离子水性聚氨酯、碘酸、乙酸、柠檬酸等为主要原料制备了自沉积防腐涂料。将铁片清洗、酸洗后对其进行自动沉积涂装并钝化。烘干后涂膜表面平整光亮,厚度为15~20 μm,附着力可达最优0级、耐盐雾性可达400 h。利用红外光谱表征聚氨酯的特征吸收峰,粒径测试表明,涂料乳液的颗粒大小在100~240 nm范围;利用扫描电镜发现涂膜表面均匀平整,热重分析表明聚氨酯材料和涂膜可分别耐受270 ℃和250 ℃的高温。

    Abstract:

    The self-deposition anticorrosive coating was prepared with anionic waterborne polyurethane, iodic acid, acetic acid, citric acid, etc. as main raw material. After cleaning and pickling, the iron sheet was automatically deposited, coated and passivated. After drying, the surface of the coating film is smooth and bright, with a thickness of 15~20 μm. Through the test of GB/T 9286-1998, the adhesion can reach the best level 0, and the salt spray resistance can reach 400 h. The characteristic absorption peaks of polyurethane were characterized by infrared spectroscopy, and the particle size test shows that the particle size of the coating emulsion is in the range of 100~240 nm. The scanning electron microscopies show that the coating surface is uniform and flat, and the thermogravimetric analysis show that the polyurethane material and the coating could withstand the high temperature of 270 ℃ and 250 ℃, respectively.

    参考文献
    相似文献
    引证文献
引用本文

戴佳静,李昀晓,李 翀,陆国建,司鹏翔,张 丹.一种环保聚氨酯自沉积防腐涂料的制备及性能[J].高分子材料科学与工程,2023,39(12):58-63. Jiajing Dai, Yunxiao Li, Chong Li, Guojian Lu, Pengxiang Si, Dan Zhang. Preparation and Properties of an Environment-Friendly Polyurethane Self-Deposition Anti-Corrosion Coating[J]. Polymer Materials Science & Engineering,2023,39(12):58-63.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-12-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司