超声振动对不同含量碳纤维增强聚丙烯制件性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2022YFB3806203) 、国家自然科学基金资助项目(52205339,51575080)


Effect of Ultrasonic Vibration on Properties of Polypropylene Reinforced with Different Carbon Fiber Contents
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用超声辅助振动注塑模具,针对3种不同质量分数(10%,15%和20%)的碳纤维增强聚丙烯(CFPP)复合材料,进行了底部带有标准拉伸试样的壳体制件的成型实验。借助X射线衍射、扫描电镜等观测分析及拉伸性能测试,研究了超声振动外场作用下,不同碳纤维含量的制件内部结晶度及凝聚态结构中碳纤维的空间形态,以及碳纤维与基体接触界面的结合强度对制件力学性能的影响。结果表明,在CFPP制件注塑成型的填充流动阶段施加600 W功率的超声振动,上述不同碳纤维含量的制件结晶度分别提高了 4.4%,7.4%和 9.8%,纤维取向程度分别提高了 5.2%,9.7%和3.5%,纤维与基体的结合强度分别提高了32.5%,12.7%和12.6%,最终使得制件的拉伸强度相比于未施加超声振动时分别提高了6.9%,6.2%和10.4%;但超声功率高达到900 W时,结晶度和纤维与基体的结合强度有所下降,导致制件拉伸强度有所降低。

    Abstract:

    Using polypropylene composites reinforced with different mass fractions of carbon fiber (10%, 15% and 20% ) , the molding experiments assisted by ultrasonic vibration were carried out for shell parts with standard tensile specimen at the bottom. By XRD, SEM and tensile test, influences of ultrasonic vibration on the crystallinity, fiber orientation, bonding strength of the contact interface between carbon fiber and matrix and tensile strength of the parts were studied. It is found that when the ultrasonic vibration of 600 W is applied to the filling stage of injection molding, the crystallization degree of the parts with 10% , 15% and 20% carbon fiber content is increased by 4.4% , 7.4% and 9.8%, and the fiber orientation degree is increased by 5.2%, 9.7% and 3.5%, respectively. The bonding strength between carbon fiber and matrix is increased by 32.5%, 12.7% and 12.6%, resulting in the tensile strength of the parts increased by 6.9%, 6.2% and 10.4%, respectively. However, when the ultrasonic power rises to 900 W, both the crystallization degree and bonding strength between carbon fiber and matrix decrease, resulting in a decrease in the tensile strength of the parts.

    参考文献
    相似文献
    引证文献
引用本文

刘 莹,杨 勇,于同敏,赵雪利,马 赛,祝铁丽.超声振动对不同含量碳纤维增强聚丙烯制件性能的影响[J].高分子材料科学与工程,2023,39(12):80-87. Ying Liu, Yong Yang, Tongmin Yu, Xueli Zhao, Sai Ma, Tieli Zhu. Effect of Ultrasonic Vibration on Properties of Polypropylene Reinforced with Different Carbon Fiber Contents[J]. Polymer Materials Science & Engineering,2023,39(12):80-87.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-12-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司