Abstract:γ- Glycidoxypropyltrimethoxy silane (KH560) modified SiO2(f- SiO2) was prepared by sol- gel method. Polym-phenylenediamine (PmPD) prepared by in-situ polymerization of m-phenylenediamine (mPD) was covalently grafted on the surface of f-SiO2 to obtain PmPD-SiO2; finally, the combination of phytic acid (PA) and PmPD- SiO2 by intermolecular force to obtain the PA/PmPD- SiO2 composite was applied for the preparation of waterborne epoxy coatings. The structure of the products was characterized by Fourier- transformed infrared spectrum, thermal gravimetric analyzer and X-ray photoelectron spectroscopy. The anti-corrosion performance of the coatings was analyzed by scanning electron microscopy, water contact angle, electrochemical and salt spray experiment. The results show that when the mass fraction of 0.5% PA/PmPD-SiO2 is added, the coating adhesion is grade 0, the pencil hardness is 3H, the impact resistance is 45 kg· cm, the corrosion inhibition efficiency is 97.2%, and the corrosion resistance is the best. The corrosion current density is reduced by 36 times compared with the pure waterborne epoxy (WEP) coating, and the low- frequency impedance modulus is increased by 2 orders of magnitude.