相对分子质量和退火处理对聚碳酸酯力/热性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Molecular Weight and Annealing Treatment on Mechanical and Thermal Properties of Polycarbonate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中研究了不同相对分子质量聚碳酸酯在经历退火处理后力学性能和热性能的变化,深入分析了相对分子质量和退火处理的影响机制。结果表明,高分子量聚碳酸酯未退火状态下抗拉伸断裂性能和冲击性能更优,相对分子质量降低和退火处理会提升拉伸强度与弯曲性能。光弹应力分析显示,高分子量未退火聚碳酸酯的残余应力高,冲击断面表现为韧性断裂,对应冲击强度高。动态力学热分析和差示扫描量热法研究发现,随着相对分子质量增大,聚碳酸酯的玻璃化转变温度升高,链段运动更加趋于弹性响应。

    Abstract:

    The mechanical and thermal properties of polycarbonate with different molecular weight and injection molding annealing heat treatment time were studied, and the reasons for the influence of molecular weight and annealing on the properties were analyzed. The results show that the high molecular weight polycarbonate has better tensile fracture resistance and impact performance without annealing. Low molecular weight and annealing heat treatment can improve the tensile yield stress and bending properties. The photoelastic analysis of impact samples shows that high molecular weight unannealed polycarbonate has high residual stress, large degree of entanglement, plastic deformation after impact and high impact toughness. Through dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC), it is found that as the molecular weight increases, the glass transition temperature increases and the chain motion tends to be more elastic.

    参考文献
    相似文献
    引证文献
引用本文

许雪婷,王 韬,孙琦伟,王博伦,葛 勇,郎建林,颜 悦.相对分子质量和退火处理对聚碳酸酯力/热性能的影响[J].高分子材料科学与工程,2024,40(1):92-99. Xueting Xu, Tao Wang, Qiwei Sun, Bolun Wang, Yong Ge, Jianlin Lang, Yue Yan. Effect of Molecular Weight and Annealing Treatment on Mechanical and Thermal Properties of Polycarbonate[J]. Polymer Materials Science & Engineering,2024,40(1):92-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-03-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司