杂萘联苯双马来酰亚胺封装基板材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金-面上基金资助项目(52273065);国家自然科学基金-青年基金资助项目(51903028)


Preparation and Performance of Naphthalene Biphenyl Bismaleimide Substrate for Packaging
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对高精密度电子芯片对封装基板材料耐热性不断提出新的要求,合成了一种杂萘联苯双马来酰亚胺(DHPZBMI)和新型固化剂二烯丙基联苯二酚(DABP)来制备高耐热性封装基板材料。通过熔融共混的方式,使用DHPZBMI、DABP与苯并噁嗪(BOZ)改性商用N,N'-(4,4'-二苯基甲烷)双马来酰亚胺(BDM)树脂,并采用与玻璃纤维布热压的方式制备出复合材料。通过差示扫描量热分析和红外光谱研究了树脂体系的固化过程,同时,进行了流变性能、热性能、力学性能等测试。研究结果表明,体系有宽温域(>100 ℃)加工窗口,5%热失重温度(T5%)高于395 ℃,有良好的热稳定性。DHPZBMI的加入有效提高了树脂体系的耐热性,25%的DHPZBMI摩尔添加量使得树脂体系的玻璃化转变温度(Tg)提高了20 ℃,且随DHPZBMI的增加而升高,最高达288 ℃。复合材料的Tg也呈现出相同的趋势,BDDB/GF-1的Tg高达314 ℃。其复合材料弯曲强度最高为821 MPa,弯曲模量达41.2 GPa,介电损耗低至0.011,热膨胀系数低于45×10-6 K-1,与铜箔的剥离强度达1.025 N/mm。整个体系具有良好的综合性能,在封装基板领域具有广阔的应用前景。

    Abstract:

    In response to the new requirements for heat resistance of packaging substrate materials for high precision electronic chips, a heteronaphthalene biphenyl bismaleimide (DHPZBMI) and a new curing agent diallyl biphenol (DABP) were synthesized in order to prepare highly heat resistant packaging substrate materials. The composites were prepared by melt blending using DHPZBMI, DABP with benzoxazine (BOZ) modified commercial N,N'- (4,4'- diphenylmethane) bismaleimide (BDM) resin and hot pressing with glass fiber cloth. The curing process of the resin system was studied by DSC and FT- IR, while the rheological properties, thermal and mechanical properties were characterized. The results show that the system has a wide temperature range (> 100 ℃) processing window, the initial decomposition temperature T5% is higher than 395 ℃, and a good thermal stability. The Tg of the composite also shows the same trend, and the Tg of BDDB/GF- 1 is up to 314 ℃ . The bending strength of the composite is up to 821 MPa, and the bending modulus is up to 41.2 GPa; the dielectric loss is as low as 0.011; the coefficient of thermal expansion is less than 45×10-6 K-1; the peel strength with copper foil is up to 1.025 N/mm. The system has good comprehensive performance and a broad application prospect in the field of packaging substrates.

    参考文献
    相似文献
    引证文献
引用本文

牛慧敏,李战胜,宗立率.杂萘联苯双马来酰亚胺封装基板材料的制备与性能[J].高分子材料科学与工程,2024,40(1):112-122. Huimin Niu, Zhansheng Li, Lishuai Zong. Preparation and Performance of Naphthalene Biphenyl Bismaleimide Substrate for Packaging[J]. Polymer Materials Science & Engineering,2024,40(1):112-122.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-03-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司