3,3',4,4'-联苯四胺改性邻苯二甲腈树脂及其复合材料性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52173074);中央高校基本科研业务费专项资金(JKD01231701)


3,3',4,4'-Biphenyltetramine Modified Phthalonitrile Resin and Its Composite Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用3,3',4,4'-联苯四胺(LBS)与联苯型邻苯二甲腈树脂(BPh)进行预聚反应制备改性联苯型邻苯二甲腈树脂预聚物(BLBS)。利用红外光谱法、差示扫描量热仪、旋转流变仪和热重分析对BLBS的固化行为、流变性能和耐温性能进行研究。结果表明,BLBS最低可在240 ℃前开始固化,但仍需要较高的温度才能固化完全;BLBS-3固化物在氮气和空气氛围中的质量损失5%时的温度(Td5)分别为549.4 ℃和555.6 ℃。石英纤维增强BLBS复合材料(QF/BLBS)具有优异的力学性能和耐热性能,玻璃化转变温度(Tg)大于500 °C,室温弯曲强度和层间剪切强度分别为711.5 MPa和48.5 MPa,400 ℃热处理2 h后弯曲强度和层间剪切强度分别为680.5 MPa和31.3 MPa。

    Abstract:

    Modified biphenyl phthalonitrile resin prepolymer(BLBS) was prepared by prepolymerization reaction of 3,3',4,4'- biphenyltetramine (LBS) with biphenyl phthalonitrile resin(BPh). The curing behavior, rheological properties and temperature resistance of BLBS were studied by infrared spectroscopy(FT- IR), differential scanning calorimetry(DSC), rotational rheometer and thermogravimetric analysis(TGA). The results show that BLBS can start curing before 240 ℃ at the lowest, but still requires a higher temperature to fully cure; the temperature(Td5) at which the mass loss of BLBS-3 cured product is 5 % in nitrogen and air atmospheres is 549.4 ℃ and 555.6 ℃ , respectively. The quartz fiber reinforced BLBS composite (QF/BLBS) has excellent mechanical properties and heat resistance. The glass transition temperature (Tg) is greater than 500 ℃, the room temperature bending strength and interlaminar shear strength are 711.5 MPa and 48.5 MPa, respectively, and the bending strength and interlaminar shear strength are 680.5 MPa and 31.3 MPa respectively after heat treatment at 400 ℃ for 2 h.

    参考文献
    相似文献
    引证文献
引用本文

董俊宇,赵星诺,章宇琳,刘小僮,王文蓓,周 权,吴 霄.3,3',4,4'-联苯四胺改性邻苯二甲腈树脂及其复合材料性能[J].高分子材料科学与工程,2024,40(2):65-73. Junyu Dong, Xingnuo Zhao, Yulin Zhang, Xiaotong Liu, Wenbei Wang, Quan Zhou, Xiao Wu.3,3',4,4'-Biphenyltetramine Modified Phthalonitrile Resin and Its Composite Properties[J]. Polymer Materials Science & Engineering,2024,40(2):65-73.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-04-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司