Abstract:Zinc ion hybrid capacitors (ZIHCs) are a competitive alternative for the next generation of energy storage devices. They combine the high energy density of batteries and high power density of capacitors. However, the ZIHCs with battery-type cathode and capacitor-type anode mostly use electrolyte solutions, which are prone to leakage and lead to safety risks. To address this issue, this paper presented a strategy for gel polymer electrolytes (GPE) with honeycomb- like three- dimensional network morphology, which was prepared from cellulose, hydroxyethylcellulose and polyvinyl alcohol via freeze-thawing and following electrolyte absorption method. The optimized GPE not only exhibits good mechanical properties (tensile strength of 0.24 MPa, elongation at break of 289% ), but also shows a high ionic conductivity (58.5 mS/cm). A ZIHC composed of GPE, manganese dioxide cathode, and activated carbon cathode achieves a specific capacitance of 31.5 F/g and an energy density of 15.0 Wh/kg. Furthermore, it maintains a specific capacitance of ?80% even after 1.5×104 charge/discharge cycles at 2 A/g, demonstrating promising potential application of GPE in the field of ZIHC. The usage of environmentally friendly raw materials and facile preparation method also provide a new insight for GPE investigation in applications of energy storage and flexible wearable electronics.