聚(丙交酯-己内酯)的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

云南省基础研究专项(202301AT070018);云南省青年拔尖人才万人计划(YNWR-QNBJ-2019-094)


Preparation and Properties of Poly (lactate-co-ε-caprolactone) Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以L-丙交酯(L-LA)与ε-己内酯(ε-CL)为原料,制备了3种不同比例的聚(丙交酯-己内酯)共聚物(PLCL),通过螺杆挤出将其加工成型。核磁共振氢谱和红外光谱结果表明,制备的PLCL结构与理论产物结构一致,凝胶渗透色谱结果显示3种不同比例的PLCL相对分子质量均在10万以上。拉伸性能及接触角测量结果表明,材料结构牢固且为亲水性,力学性能较好,并且通过与现有非降解骨科材料比较,能达到应用要求。热分析和降解实验结果显示,随着L丙交酯的含量增多,PLCL的热稳定性降低,降解速率变快。细胞毒性研究表明,3种材料的细胞存活率均超过100%,具有一定增殖作用,显示出其在骨科材料中的应用前景。

    Abstract:

    Using L-Lactide (L-LA) and ε-caprolactone (ε-CL) as raw materials, three kinds of poly (lactide caprolactone) copolymers (PLCL) with different proportions were prepared by screw extrusion. The results of hydrogen NMR and infrared spectroscopy show that the structure of PLCL is consistent with that of the theoretical products. The molecular weight of PLCL with three different proportions is more than 10000. The results of tensile properties and contact angle measurement show that the material is strong, hydrophilic and has good mechanical properties, and can meet the application requirements by comparing with existing non- degradable orthopedic materials. The results of thermal analysis and degradation experiments show that the thermal stability of PLCL decreases and degradation rate increases with the increase of L-lactide content. The cytotoxicity study shows that the survival rate of the three materials is more than 100%, and they have a certain proliferation effect, which shows their application prospect in orthopedic materials.

    参考文献
    相似文献
    引证文献
引用本文

尹琪琦,陈荣盈,王 昱,丁亚北,李宏利.聚(丙交酯-己内酯)的制备及性能[J].高分子材料科学与工程,2024,40(7):18-26. Qiqi Yin, Rongying Chen, Yu Wang, Yabei Ding, Hongli Li. Preparation and Properties of Poly (lactate-co-ε-caprolactone) Composites[J]. Polymer Materials Science & Engineering,2024,40(7):18-26.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-09-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司