碳纳米管选择性分布增韧聚乳酸/聚己二酸对苯二甲酸丁二醇酯共混材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

教育部产学合作协同育人项目(230907544242551)


Selective Localization of Carbon Nanotubes in Poly(lactic acid)/ Poly(butylene adipate-co-terephthalate) Blends with Improved Toughness
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用碳纳米管(CNTs)来调控聚乳酸(PLA)/聚己二酸对苯二甲酸丁二醇酯(PBAT)共混材料的微结构和宏观性能,探究了CNTs添加量对PLA/PBAT共混物结晶行为、相形貌及热力学性能的影响规律,基于润湿理论量化分析了CNTs选择性分布的原因,探讨了CNTs增韧PLA/PBAT共混材料的内在机制。结果表明,CNTs选择性分布在PBAT中,显著增大了PBAT相的粒径,使共混材料相形貌粗化,暗示CNTs不具备增容作用;提高CNTs的添加量,共混材料拉伸强度略有降低,断裂伸长率大幅提升;CNTs的质量分数为1%时,PLA/PBAT/CNTs试样的断裂伸长率达到最大,与未添加CNTs的PLA/PBAT试样相比提高了258.6%。

    Abstract:

    Carbon nanotubes (CNTs) was used to modify the structure and properties of poly(lactic acid) (PLA)/poly(butyleneadipate- co-terephthalate) (PBAT) blends. The effects of CNTs content on the crystallization behavior, phase morphology, thermal properties and mechanical properties of the PLA/PBAT blends were studied. The reason for the selective localization of CNTs was analyzed carefully based on wetting theory. And the mechanism of CNTs toughening PLA/PBAT blends was investigated. The results show that the selective localization of CNTs in PABT enlarges the size of PBAT particles, indicating that CNTs are not a real compatibilizer of PLA/PBAT blends. The addition of CNTs slightly reduces the tensile strength but greatly increases the elongation at break. When the mass fractioin of CNTs is 1%, the elongation at break of PLA/PBAT/CNTs samples reaches the maximum, which is 258.6% higher than that of PLA/PBAT.

    参考文献
    相似文献
    引证文献
引用本文

李桂丽, 冯 巧, 陈树芳, 尹田欣, 何彝昕, 谢 丹, 毛辰静, 邵春光, 高 蓬.碳纳米管选择性分布增韧聚乳酸/聚己二酸对苯二甲酸丁二醇酯共混材料[J].高分子材料科学与工程,2024,40(7):63-69. Guili Li, Qiao Feng, Shufang Chen, Tianxin Yin, Yixin He, Dan Xie, Chenjing Mao, Chunguang Shao, Peng Gao. Selective Localization of Carbon Nanotubes in Poly(lactic acid)/ Poly(butylene adipate-co-terephthalate) Blends with Improved Toughness[J]. Polymer Materials Science & Engineering,2024,40(7):63-69.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-09-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司