碳纤维/六方氮化硼/三元乙丙橡胶复合材料导热性能及其数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省重点研发计划项目(2024B0101040003);技术领域基金项目(2023-JCJQ-JJ-0080);中山市科技计划(2020AG022)


Thermal Conductivity of CF/h-BN/EPDM Composites and Numerical Simulation of Their Thermal Conductivity
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    5G通讯、消费电子和新能源汽车领域的快速发展对导热材料的需求日益增长,高性能导热复合材料逐渐成为研究热点。由于导热硅胶垫片存在小分子硅油渗出和高温挥发的缺点,不适合用于高洁净度要求的应用场景。文中采用液体三元乙丙橡胶(EPDM)为基体,以碳纤维(CF)和六方氮化硼(h-BN)为导热填料,制备了不渗油且无VOC排放的柔性导热复合材料,并采用有限元仿真模拟了不同体积比和体积分数的混合填料填充复合材料的导热行为,预测了复合材料的导热系数,并将导热系数的模拟值与实测值进行对比,二者误差在10%以内,吻合度较高。该研究为混合填料填充柔性导热复合材料的导热性能模拟和预测提供了新途径。

    Abstract:

    With the rapid development of 5G communication, electronics and new energy vehicles, there is an increasing demand for thermal conductivity materials. Consequently, high- performance thermal conductivity composites have emerged as a prominent area of research. Considering the limitations associated with seepage and high-temperature volatilization of small molecule silicone oil in thermal conductive silicone rubber gaskets, they are not suitable for some applications requiring high cleanliness. Therefore, this study employed liquid ethylene-propylene-diene monomer rubber (EPDM) as matrix, and incorporated carbon fiber (CF) and hexagonal boron nitride (h-BN) as thermal conductive fillers to fabricate flexible thermal conductive composites without silicone oil leaking and VOC emission. Finite element simulation was utilized to simulate the thermal conductive behavior of the composites and predict the thermal conductivity of the composites filled with hybrid fillers at different volume ratios and fractions. The results demonstrate that the discrepancy between simulated and measured thermal conductivities is less than 10%, indicating good agreement between them. This study presented a novel approach for simulating and predicting the thermal conductivity of flexible thermal conductive composites filled with hybrid fillers.

    参考文献
    相似文献
    引证文献
引用本文

刘泽宏,蒋兴华,郭建华.碳纤维/六方氮化硼/三元乙丙橡胶复合材料导热性能及其数值模拟[J].高分子材料科学与工程,2024,40(7):85-93. Zehong Liu, Xinghua Jiang, Jianhua Guo . Thermal Conductivity of CF/h-BN/EPDM Composites and Numerical Simulation of Their Thermal Conductivity[J]. Polymer Materials Science & Engineering,2024,40(7):85-93.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-09-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司