乙酸乙烯酯-马来酰亚胺共聚物及其醇解物的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省科技厅重点研发项目(2023YFG0238)


Preparation of VinylAcetate/N-Maleimide Copolymer and Its Alcoholysis Product
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    乙酸乙烯酯(VAc)的溶液聚合一般以甲醇为溶剂,但以甲醇为溶剂进行VAc与马来酰亚胺(HMI)的共聚研究目前较少报道。文中采用Finemen-Ross方法计算了VAc与HMI在甲醇中的竞聚率,分别是rHMI =4.15和rVAc =1.76×10-3。之后采用饥饿投料法获得了一系列含有不同HMI含量的聚乙酸乙烯酯共聚物(PVAc/HMI),醇解后得到聚乙烯醇共聚物(PVA/HMI)。结果显示,随HMI投料比从0%(摩尔分数)增加到4%,所得PVAc/HMI的Tg上升了20%、弹性模量增加了67%,PVA/HMI的Tg上升了12%。

    Abstract:

    The solution polymerization of vinyl acetate (VAc) is generally carried out using methanol as solvent, while there are currently few reports on the copolymerization of maleimide (HMI) and VAc using methanol as solvent. In this article, the reactivity ratio of HMI and VAc in methanol calculated according to Finemen-Ross method, is rHMI =4.15 and rVAc =1.76×10-3. A series of vinyl acetate/N-maleimide copolymers (PVAc/HMI) with different HMI contents were prepared by starvation feeding method, and then the alcoholysis product PVA/HMI was obtained after alcoholysis. The test results show that, the Tg of PVAc/HMI and PVA/HMI is increased by 20% and 12% respectively, while the elastic modulus of PVAc/HMI is increased by 67%, as the HMI feed ratio increases from 0% to 4%.

    参考文献
    相似文献
    引证文献
引用本文

赵小海,白军伟,张军华.乙酸乙烯酯-马来酰亚胺共聚物及其醇解物的制备[J].高分子材料科学与工程,2024,40(8):19-29. Xiaohai Zhao, Junwei Bai, Junhua Zhang. Preparation of VinylAcetate/N-Maleimide Copolymer and Its Alcoholysis Product[J]. Polymer Materials Science & Engineering,2024,40(8):19-29.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-10-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司