超临界CO2辅助聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二酯珠粒发泡
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省重点研发计划(2021BGD018)


Supercritical CO2 Assisted Polyethylene Terephthalate/Polybutylene Terephthalate Beads Foaming
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚对苯二甲酸丁二酯(PBT)与聚对苯二甲酸乙二醇酯(PET)化学结构相似,熔融温度相近且结晶速率、熔体强度等性能互补的特点在PET/PBT合金化方面得到广泛应用。文中采用扩链剂乙烯-丙烯酸甲酯共聚物接枝甲基丙烯酸缩水甘油酯(EMA-g-GMA)和碳纳米管(CNTs)协同改性PET/PBT,并通过超临界CO2浸渍辅助发泡制备了PET/PBT发泡珠粒。结果表明,EMA-g-GMA(EG)的加入起到了扩链增容效果,提高了体系交联度和黏弹性;CNTs的加入有效提高了体系稳定性和黏度,并延缓了PET/PBT基体的降解;EG和CNTs的加入使可发泡温度从260℃降至200 ℃,泡孔分布趋于均匀,泡孔结构得到改善;在260℃,平均泡孔尺寸从4.4μm降至3.37μm,泡孔密度从3.06×109 cm-3提高至5.32×109 cm-3;PET/PBT/EG,PET/PBT/CNTs和PET/PBT/EG/CNTs的拉伸强度相比于PET/PBT,分别提高了97%,67.6%和79.3%,断裂伸长率分别提高了93.4%,57.4%和80.3%。

    Abstract:

    Polybutylene terephthalate (PBT) is widely used in PET/PBT alloying due to its similar chemical structure, similar melting temperature and complementary properties such as crystallization rate and melt strength. PET/PBT foamed beads were prepared by supercritical CO2 foaming by using chain extender ethylene-methyl acrylate copolymer grafted glycyl methacrylate (EMA-g-GMA) and carbon nanotubes (CNTs) to modify PET/PBT. The results show that the addition of EMA-g-GMA (EG) can expand the chain and increase the cross-linking degree and viscoelasticity of the systems. The addition of CNTs effectively improves the stability and viscosity of the systems, and delays the degradation of PET/PBT matrix. At the same time, the addition of CNTs can induce crystallization and accelerate the crystallization rate. The addition of EG and CNTs can increase the cell density, make cell distribution more uniform, improve the cell structure, and reduce the foamable temperature from 260 ℃ to 200 ℃. Compared with PET/PBT, the tensile strength of PET/PBT/EG, PET/PBT/CNTs and PET/PBT/EG/CNTs is increased by 97%, 67.6% and 79.3%, respectively, and the elongation at break is increased by 93.4%, 57.4% and 80.3%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

陈先娇,梁锦涵,胡圣飞.超临界CO2辅助聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二酯珠粒发泡[J].高分子材料科学与工程,2024,40(8):50-59. Xianjiao Chen, Jinhan Liang, Shengfei Hu. Supercritical CO2 Assisted Polyethylene Terephthalate/Polybutylene Terephthalate Beads Foaming[J]. Polymer Materials Science & Engineering,2024,40(8):50-59.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-10-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司