抗菌聚己内酯基三维纤维骨架材料的制备及油水分离性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

安徽工程大学校级科研项目(Xjky2022073);"纺织面料”安徽省高校重点实验室安徽省纺织工程技术研究中心联合开放基金(2021AETKL14)


Preparation and Oil/Water Separation Properties of Antibacterial Polycaprolactone-Based 3D Electrostatic Fiber Scaffold
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    油水分离及水体抗菌处理是水资源应用领域的重要课题。基于此,文中以二氯二甲基海因(DCDMH)为添加剂、聚己内酯(PCL)电纺纤维为骨架,构建了一种疏水亲油的三维纤维骨架材料。利用扫描电镜及表面能谱对材料的结构形态及元素分布进行了分析,并对材料的密度及孔隙率进行了研究。这种材料疏水性能较好,接触角可达141.1°,且对有机溶剂的吸附性能优异,吸附量可达74~206g/g。材料对有机溶剂循环吸附性能良好,15次吸附/解吸附后油水分离效率仍高于95%。基于DCDMH的添加,样品在30min内对数量级为6的金黄色葡萄球菌及大肠杆菌灭活率可达到79.59%及71.76%,具有一定的抗菌效果。

    Abstract:

    Oil/water separation and antibacterial treatment of water resources are the major topics in the worldwide. Based on this, a hydrophobic 3D electrostatic fiber scaffold composed of polycaprolactone (PCL) electrostatic fibers and containing 1,3-dichloro-5,5- dimethylhydantoin (DCDMH) as additive was designed. SEM and EDS were used to analyze the microstructure and element distribution of the materials. The density and porosity of these materials were investigated. The electrostatic fiber-based aerogel exhibits excellent hydrophobic properties, with a contact angle of 141.1°, and an adsorption capacity for organic solvents between 74~206 g/g. The materials show a good reusability to organic solvent, and the adsorption efficacy reaches 95% after 15 cycles. Due to the addition of DCDMH, the electrostatic fiber-based aerogel exhibits a considerable antibacterial effect. After being treated with 6 logs of S. aureus and E. coli O157:H7, 79.59% and 71.76% of both bacteria are inactivated within 30 min.

    参考文献
    相似文献
    引证文献
引用本文

张文雅,董硕,刘絮瑶,洪大卫,程德山,王英沣.抗菌聚己内酯基三维纤维骨架材料的制备及油水分离性能[J].高分子材料科学与工程,2024,40(8):147-154. Wenya Zhang, Shuo Dong, Xuyao Liu, Dawei Hong, Deshan Cheng, Yingfeng Wang. Preparation and Oil/Water Separation Properties of Antibacterial Polycaprolactone-Based 3D Electrostatic Fiber Scaffold[J]. Polymer Materials Science & Engineering,2024,40(8):147-154.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-10-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司