Abstract:Polyethylene terephthalate (PET) is widely used in packaging industry due to its excellent comprehensive performance. But PET is difficult to degrade under natural conditions and is highly susceptible to environmental pollution. To alleviate the problems, waste PET was depolymerized and recycled, and the product was transformed into a new biodegradable copolyester. Firstly, the optimal alcoholysis conditions were determined with butanediol (1,4-BDO) as alcoholysis agent, and the depolymerization rate of PET could reach 99%, and the actual yield of the alcoholysis product could reach 80% of the theoretical yield. Through FT- IR, 1H- NMR and liquid chromatography-mass spectrometry (LC-MS), it is proved that the alcoholysis products are mainly butylene terephthalate and a small amount of dimer and trimer (denoted as BHBT). Novel copolyesters, poly(terephthalic acid adipate-butylene glycol cyclohexane dimethanol ester), were prepared from the alcoholysis product BHBT as well as terephthalic acid (PTA), respectively (denoted as rPBCAT and PBCAT, respectively). The structures and properties of rPBCAT and PBCAT were analyzed and compared, and it is found that BHBT could replace PTA to participate in copolymerization reaction. rPBCAT has the same chemical structure as PBCAT, and rPBCAT has the same excellent thermal and mechanical properties, with a T-5% of 344.2 ℃, a tensile strength of 9.98 MPa, and an elongation at break of 726.7% . In conclusion, it is shown that the waste PET can be successfully recycled and converted into a new type of co- polyester with high added value, which provides a new way to solve the white pollution of non-degradable polyester and has obvious economic and social value.