Abstract:MWCNTs- g- GO highly active multidimensional carbon materials grafted with graphene oxide(NCO) functional groups were prepared by graft modification of mixture for graphene oxide and hydroxyl carbon nanotubes hybrid carbon materials (OH-MWCNTs) with isophorone diisocyanate, and then the novel polyurethane composites were prepared. Effect of MWCNTs- g- GO highly active multidimensional carbon materials on the mechanical properties, aging behavior and electrical conductivity were investigated, respectively. By XRD, the interlayer spacing of GO in the modified hybrid carbon material is enlarged from 0.87 nm to 1.71 nm, and the degree of carbon nanotube entanglement is significantly reduced, which effectively enhances the dispersibility of the carbon nanomaterials; with the increase of the content of multidimensional MWCNTs-g-GO, the mechanical properties of polyurethane were tested, and the hardness and fixed- extension strength are gradually increased, and the elongation at break is monotonically decreased and tensile strength is firstly increases and then decreases. When the content is 0.05%, the tensile strength is increased by 23% compared with that of the blank sample, and increased to 48.7 MPa; the decay rate after aging at 150 ℃ × 5 d is about 26.3%; and when the content is 0.20%, the electrical conductivity is about 6.12 × 10-4 S/cm, which is 76 times higher than that of the blank sample. Compared with single carbon materials such as GO or CNTs, multi- dimensional carbon nanomaterials exhibit more excellent reinforcement, thermal oxidation resistance, and conductivity effect on polyurethane.