Abstract:The curing effect and subsequent storage hardening during the processing of natural rubber (NR) will cause the end groups or abnormal groups of rubber hydrocarbon molecules to form cross-linked structures with the non-adhesive components to produce gels. According to the three main stages of gel production, the gels can be divided into latex ripening gel, clot curing gel and storage hardening gel, and raw rubber containing latex curing gel (NR-L), raw rubber containing curing gel (NR-C) and raw rubber containing storage hardening gel (NR-S) were prepared. The results show that the Mooney viscosity and gel content decreas rapidly within 2 min of mastication time, but the decline rate of NR-L is significantly slower than that of NR-C and NR-S, and the Mooney viscosity and gel content are also maintained at the end point, indicating that the strength of gel network structure is different, and the strength of the network structure of NR-L is higher. In terms of nitrogen content, NR-L is the highest, NR- C is the lowest, ester content, NR- L is the highest, NR- S is the lowest, and further temperature scanning stress relaxation test results show that the network structure of NR-L is mainly composed of the natural network of phospholipids as branching point, and the network structure of NR-S is mainly composed of the natural network with protein as branching point, and the natural network strength with phospholipid as branching point is higher than that of the natural network with protein as branching point.