Abstract:To deal with the potential fire risk, it is inevitable for flame retardancy of PC/PBT. However, the flame retardant efficiency in PC/PBT blends is unsatisfactory due to the discrepancy in selection of flame retardant for PC and PBT. In this work, PC/PBT alternating layered blends with the restricted distribution of flame retardants were successfully prepared via co-extrusion technology to improve the mechanical and flame-retardant properties simultaneously. The restricted distribution of flame retardants addresses the contradiction between high flame- retardant performance and high strength as well as high toughness in traditional PC/PBT blends. The PC/PBT alternating layered blends exhibit excellent tensile strength (48.1 MPa) and impact strength (15.8 kJ/m2), achieving improvements of 139.7% and 89.7%, respectively, compared to traditional blends. The flame- retardant grade of the alternating layered blends can easily achieve UL94 V0@1.5 mm, with a decrease of 11.2% in peak heat release rate (PHRR). This work provides a novel strategy for the design and fabrication of flame-retardant PC/PBT blends with high-performance.