聚氨酯/聚乙烯胺复合胶体在纤维素纤维材料的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(52203139);江苏省自然科学基金青年基金资助项目(BK20221096);中国博士后基金面上资助项目(2022M711356)


Application of Polyurethane/Polyvinylamine Composite Colloid in Cellulose Fiber Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中将合成的水性聚氨酯与聚乙烯胺物理共混制备了聚氨酯/聚乙烯胺(PU/PVAm)复合胶体,探究了胶体制备条件对成膜性能的影响及其在纤维素纤维材料的应用潜力。结果表明,当聚乙烯胺质量分数为60%时,所得胶体复合膜的断裂伸长率为1112.5%,拉伸断裂强度为7.39 MPa,韧性为52.7 MJ/m3 。将复合胶体作为表面施胶剂制备纸张,施胶量为6%的手抄片与原纸相比,抗张指数和撕裂指数分别提升204%和131%。对聚氨酯类复合胶体的制备及应用有一定的借鉴意义。

    Abstract:

    Polyurethane/polyvinylamine (PU/PVAm) composite colloids were prepared by physically blending synthesized waterborne polyurethane with polyvinylamine. The aim of this research was to investigate the effects of colloid preparation conditions on film- forming properties and their potential applications in cellulose fiber materials. The results reveal that when the mass fraction of polyvinylamine is 60% , the resulting colloidal composite film exhibits an elongation at break of 1112.5% , a tensile breaking strength of 7.39 MPa, and a toughness of 52.7 MJ/m3. Furthermore, the composite colloid was employed as surface sizing agent for paper preparation. It is observed that the handsheets with a sizing amount of 6% show a significant improvement in the tensile index and tear index, with increases of 204% and 131%, respectively, compared to the original paper. This research holds significance for the preparation and application of polyurethane-based composite colloids.

    参考文献
    相似文献
    引证文献
引用本文

祝博文,吴 赟,龙 柱,司鹏翔,张 丹.聚氨酯/聚乙烯胺复合胶体在纤维素纤维材料的应用[J].高分子材料科学与工程,2024,40(10):57-65. Bowen Zhu, YunWu, Zhu Long, Pengxiang Si, Dan Zhang. Application of Polyurethane/Polyvinylamine Composite Colloid in Cellulose Fiber Materials[J]. Polymer Materials Science & Engineering,2024,40(10):57-65.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-12-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司