Abstract:A novel phosphorus-nitrogen composite flame retardant DMM was synthesized using 9,10-dihydro-9-oxa-10-phosphafi-10-oxide (DOPO), maleic anhydride (MA) and melamine (ME) as main raw materials. The structure and thermal stability of DMM were characterized by Fourier infrared spectroscopy (FT- IR) and thermogravimetric analysis (TGA), respectively. DMM and polylactic acid (PLA) were compounded to prepare flame retardant composites. The flame retardant properties of the composites were investigated by limiting oxygen index (LOI), vertical combustion test (UL-94) and cone calorimetric test (CCT) analysis. The results show that the flame retardant performance of the composites reaches UL-94 V0 level and LOI increases from 21% to 30% when the mass fraction of DMM is 3%. The peak heat release rate (PHRR) decreases from 510 kW/m2 to 418 kW/m2 , the total heat release (THR) decreases from 87 MJ/m2 to 73 MJ/m2 , the total smoke release (TSR) decreases from 211 m2 /m2 to 70 m2 /m2 , and the amount of CO2 released also decreases. Scanning electron microscopy (SEM) analysis of the char layer after combustion reveals that the PLA composite with 3% DMM produces a dense and porous char layer which effectively cut off oxygen and heat transfer. In addition, DMM releases a large amount of non-combustible gas during combustion. Consequently, DMM can play a flame retardant role in the solid and gas phases. However, the mechanical performance test results show that the addition of DMM leads to a slight decrease in the mechanical properties of PLA.