弱溶胀作用制备的模量异质微结构纤维膜应变传感器
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川大学高分子材料工程国家重点实验室项目(sklpme2023-1-07,sklpme-2022-3-06)


Stretchable Fiber Mat Strain Sensor with Surface Hetero-Modulus Microstructure Fabricated by Weak Solvent Swelling Effect
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    随着柔性可穿戴电子设备的普及,制备具有高力学弹性、优异力电响应性能的电阻型可拉伸应变传感器颇具研究意义。其中,双层结构的电阻型应变传感器因为优异的应变传感性能近年来备受关注。然而,在应用过程中,导电层通常会产生不可逆的贯穿式微裂纹,造成应变作用下电阻的不稳定增长,限制了其在实际场景中的应用。基于“微裂纹”传感机理,通过同轴纺丝的加工方法在低模量的热塑性聚氨酯(TPU)取向电纺纤维膜表面引入高模量的羧基化聚苯乙烯微球(PSNSs)形成模量异质微结构,这种微结构可以在应变过程中有效耗散局部应力,从而有效抑制贯穿式微裂纹的扩展。利用物理/化学作用对复合纤维膜进行界面作用改性处理,通过调控PSNSs分散体系的浓度及溶剂配比来构筑不同表面特性的异质模量微结构,以便调节材料的应变响应行为。所制备的可拉伸导电薄膜能够实现快速应变响应与回复(49.7 ms/62.5 ms),并且在0~30%应变范围内保持线性的相对电阻-应变响应特征(应变敏感因子GF=257)。

    Abstract:

    With the increasing demand of flexible wearable electronic devices, it is of great significance to fabricate strain sensors with high mechanical elasticity and excellent electro-mechanical response. Among them, bilayer structured resistive strain sensors have recently aroused more attention thanks to their superior strain sensing performance. However, in the practical application, the conductive layer will induce the generation of irreversible penetrating micro-cracks, resulting in the exponential increase of resistance under strain to limit its application in practical scenarios. Based on the "microcrack" sensing mechanism, high- modulus carboxylated polystyrene microspheres (PSNSs) were introduced into the surface of electrospun thermoplastic polyurethane (TPU) fiber mats with aligned nanofibers by coaxial electrospinning to form hetero-modulus microstructures. Such a hetero-modulus microstructure on the fiber surface can effectively dissipate local strain during stretching, cutting off the propagation of penetrating microcracks during strain loading. The strain sensing behavior of the hetero-modulus materials could be adjusted by adjusting the concentration and ratio of solvents for the PSNSs suspensions, as well as the physical/chemical interactions among fibers, PSNSs, and silver nanoparticles. The as-prepared conductive composite films can achieve a fast response and recovery (49.7 ms/62.5 ms), maintain a linear response with high strain sensitivity (gauge factor, GF=257) over a relatively wide strain range (0~30%).

    参考文献
    相似文献
    引证文献
引用本文

魏垲东,柯 凯,尹 波.弱溶胀作用制备的模量异质微结构纤维膜应变传感器[J].高分子材料科学与工程,2024,40(10):109-116. Kaidong Wei, Kai Ke, Bo Yin. Stretchable Fiber Mat Strain Sensor with Surface Hetero-Modulus Microstructure Fabricated by Weak Solvent Swelling Effect[J]. Polymer Materials Science & Engineering,2024,40(10):109-116.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2024-12-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司