Abstract:This study investigated the effects of modified hemicellulose polyethers with different substitution ratios on the adsorption behavior, water-reducing performance, and mechanical properties of polycarboxylate superplasticizers. Using xylan-type hemicellulose as the raw material, modified hemicellulose polyethers (ESBECs) were synthesized through ethylene oxide etherification and acrylic acid esterification. ESBECs were then used to replace 5%~20% of methylallyl polyoxyethylene ether (TPEG) in free-radical polymerization to prepare hemicellulose-copolymerized polycarboxylate superplasticizers (TBPCEs). The results showed that, at a solid dosage of 0.12%, samples with 5%~15% ESBECs substitution achieved a cement paste fluidity of approximately 250 mm, whereas the control sample failed to spread effectively. In particular, the interval between the final and initial setting times of the sample with 15% ESBECs substitution, namely TBPCEs-15, was 2.9 times that of the methylallyl polyoxyethylene ether-based polycarboxylate superplasticizer control sample (TPCEs), indicating both high water-reducing efficiency and slow-release characteristics. The adsorption layer thickness of TBPCEs-15 on cement particles reached 2.53 nm, and the apparent Zeta potential of the cement particle suspension was ?4.11 mV, suggesting that its dispersion performance was mainly dominated by steric hindrance. In addition, the 7 d compressive strength of the concrete specimen containing TBPCEs-15 reached 28.6 MPa, which was 42.3% higher than that of the control sample. These results indicate that the unique multi-hydroxyl rigid structure of hemicellulose enhances the anchoring effect of superplasticizer molecules on cement particle surfaces, while its branched topological characteristics improve both dispersion performance and retarding effect through the synergistic action of steric hindrance and electrostatic repulsion.