多重氢键增强型蓖麻油基UV固化聚氨酯胶黏剂:内聚强度与热稳定性的协同提升
作者:
作者单位:

东北林业大学 材料科学与工程学院,黑龙江 哈尔滨 150000

作者简介:

通讯作者:

中图分类号:

基金项目:

黑龙江省重点研发计划项目(2023ZX02B02)


Multiple Hydrogen Bond-Enhanced Castor Oil-Based UV-Curable Polyurethane Adhesive: Synergistic Improvement in Cohesive Strength and Thermal Stability
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本研究通过分子设计构建多重氢键网络,开发了一种高性能蓖麻油基紫外光固化聚氨酯胶黏剂。以己二酸二酰肼(ADH)和1,4-丁二醇(BDO)为复合扩链剂(最佳摩尔比5:5),与异佛尔酮二异氰酸酯(IPDI)反应合成异氰酸酯封端预聚物,引入蓖麻油替代石油基多元醇,并采用季戊四醇三丙烯酸酯(PETA)封端。树脂与活性稀释剂、光引发剂1173复配后,在365 nm紫外光(照射距离15 cm)下固化。结果表明,当n(ADH)/n(BDO)=5:5时,胶膜拉伸强度达23.48 MPa,断裂伸长率22.58%;玻璃/玻璃基材胶接强度15.94 MPa,玻璃/木材基材达12.73 MPa;玻璃化转变温度(Tg)提升至147.78 ℃,热稳定性显著增强;同时获得最高储能模量(0.9 GPa)、透光率(90%以上)、凝胶含量(97.89%)及最优润湿性。该研究为生物基高性能胶黏剂提供了新策略。

    Abstract:

    A high-performance castor oil-based UV-curable polyurethane adhesive was developed by constructing a multiple hydrogen bond network through molecular design. Adipic acid dihydrazide (ADH) and 1, 4-butanediol (BDO) used as composite chain extenders (optimal molar ratio 5:5), reacted with isophorone diisocyanate (IPDI) to synthesize isocyanate-terminated prepolymers. Castor oil was introduced to replace petroleum-based polyols, and the prepolymers were terminated with pentaerythritol triacrylate (PETA). The resin was blended with active diluent and photoinitiator 1173, then cured at 365 nm UV light (irradiation distance 15 cm). Results indicate that when n(ADH)/n(BDO) = 5:5, the tensile strength of the adhesive film reaches 23.48 MPa, with an elongation at break of 22.58%; the bond strength between glass and glass substrates is 15.94 MPa, and between glass and wood substrates is 12.73 MPa; the glass transition temperature (Tg) is increased to 147.78 °C, significantly enhancing thermal stability; simultaneously achieving the highest storage modulus of 0.9 GPa, light transmittance (over 90%), gel content (97.89%), and optimal wettability. This study provides a new strategy for bio-based high-performance adhesives.

    参考文献
    相似文献
    引证文献
引用本文
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-09-22
  • 录用日期:2026-03-27
  • 网络出版日期:2026-09-16
  • 在线发布日期:
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司