钴基多孔碳材料/微纳氮化铝/聚丙烯导热复合材料的制备与性能
DOI:
作者:
作者单位:

江苏理工学院 化学化工学院,江苏 常州 213001

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

江苏理工学院横向基金 (KYH24236)


Preparation and Properties of Cobalt-based Porous Carbon Material/ Micro-nano Aluminum Nitride/Polypropylene Thermally Conductive Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对单一导热填料改性聚丙烯(PP)存在导热网络不连续、导热性能提升受限的问题,以沸石咪唑酯骨架-67(ZIF-67)为前驱体,经高温煅烧制得钴基多孔碳材料(Co@C)。本文以Co@C/微纳氮化铝(AlN)作为导热填料对PP进行改性,改变Co@C的用量,构建复配协同传热路径。采用扫描电镜(SEM)、透射电镜(TEM)、导热系数测试仪、X射线衍射仪(XRD)、差示量热扫描仪(DSC)等对导热复合材料的微观形貌、结晶行为以及导热性能等进行分析表征。结果表明;当Co@C含量为0.25 g时,Co@C/微纳AlN/PP复合材料的结晶度最高,为36.92%,导热系数达最大值,为0.362 W/m·K,较AlN/PP复合材料体系(0.297 W/m·K)提高了21.89%,Co@C/微纳AlN协同传热路径填充PP基体后可促进复合材料内部导热网络的形成与构筑,有效提高了复合材料的导热性能。

    Abstract:

    To address the issue of discontinuous thermal conductive networks and limited heat dissipation enhancement in polypropylene (PP) modified with single thermally conductive fillers. Cobalt-based porous carbon materials(Co@C) were prepared by high-temperature calcination using zeolitic imidazolate framework-67(ZIF-67) as the precursor. Polypropylene (PP) was modified with Co@C/micro-nano aluminum nitride(AlN) as thermally conductive fillers. By adjusting the mass ratio of Co@C to micro-nano AlN, a synergistic heat transfer path between Co@C and micro-nano AlN was constructed, and the properties of Co@C/micro-nano AlN/PP composites were investigated. Scanning electron microscopy(SEM), transmission electron microscopy(TEM), thermal conductivity tester, X-ray diffractometer(XRD), and differential scanning calorimeter(DSC) were employed to characterize the micro-morphology,crystallization behavior, and thermal conductivity of the composites. The results show that when the content of Co@C is 0.25 g, the composite exhibits the highest crystallinity of 36.92% and the maximum thermal conductivity of 0.362 W/m·K, which is 21.89% increase compared to AlN/PP composites (0.297 W/m·K), indicating an effective improvement in thermal conductivity. Incorporating the Co@C/micro-nano AlN synergistic thermal pathway into the PP matrix promote the formation and construction of an internal thermal network in the composite, effectively enhancing its thermal conductivity.

    参考文献
    相似文献
    引证文献
引用本文
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-09-29
  • 录用日期:2026-07-07
  • 网络出版日期:2026-10-16
  • 在线发布日期:
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司