等规聚丙烯/聚酰胺11/马来酸酐接枝聚烯烃共混材料及其微孔发泡行为
作者:
作者单位:

1.郑州大学材料科学与工程学院 橡塑模具国家工程研究中心,河南 郑州 450000;2.中石化(河南)炼油化工有限公司,河南 洛阳 471012

作者简介:

通讯作者:

中图分类号:

基金项目:

河南省科技攻关项目(212102210207,222102520008);河南省教育厅重点科研项目(26A430040)


Isotactic Polypropylene/Polyamide 11/Maleic Anhydride-Grafted Polyolefin Blend Materials and Their Microcellular Foaming Behavior
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为改善iPP与PA11的相容性并制备高性能轻量化iPP基微孔发泡材料,本文以马来酸酐接枝聚烯烃弹性体(POE-g-MAH)为相容剂,采用熔融共混-热压成型法制备了iPP/PA11/POE-g-MAH共混材料。通过扫描电镜、红外光谱、X射线衍射、差示扫描量热分析、旋转流变仪及缺口冲击测试等表征手段,系统考察了共混体系的相容性、微观结构、热行为、流变特性及力学性能,并利用超临界CO?间歇发泡工艺制备微孔发泡材料,探究其发泡行为。结果表明,POE-g-MAH作为相容剂,其马来酸酐基团可与PA11分子链末端的氨基发生反应,生成酰亚胺键;同时,POE弹性体相形成核壳结构,有效包覆PA11颗粒,促进其在iPP连续相中的均匀分散,从而显著改善iPP与PA11的相容性。该结构不仅提高了共混体系的复数黏度和冲击强度,还作为异相成核剂拓宽了共混材料的发泡温度窗口,最终获得泡孔结构致密均匀的微孔发泡材料。

    Abstract:

    To improve the compatibility between isotactic polypropylene (iPP) and polyamide 11 (PA11), and to develop high-performance lightweight iPP-based microcellular foamed materials, maleic anhydride-grafted polyolefin elastomer (POE-g-MAH) was employed as a compatibilizer to prepare iPP/PA11/POE-g-MAH blend materials via melt blending and hot-press molding. The compatibility, microstructure, thermal behavior, rheological properties, and mechanical properties of the blends were systematically characterized by SEM, FT-IR, XRD, DSC, rotational rheometry, and notched Izod impact testing. Additionally, the microcellular foamed materials were fabricated via supercritical CO? batch foaming process. The results indicate that POE-g-MAH acts as a compatibilizer, of which the maleic anhydride groups can react with the terminal amino groups of PA11 molecular chains to form imide bonds. Concurrently, the POE elastomer phase forms a core-shell structure, effectively encapsulating PA11 particles and promoting their uniform dispersion within the continuous iPP phase, thereby significantly improving the compatibility between iPP and PA11. This structure not only enhances the complex viscosity and impact strength of the blend system but also serves as a heterogeneous nucleating agent, broadening the foaming temperature window of the blend material. Ultimately, a microcellular foam with a dense and uniform cell structure was obtained.

    参考文献
    相似文献
    引证文献
引用本文
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-10-15
  • 录用日期:2026-07-08
  • 网络出版日期:2026-09-29
  • 在线发布日期:
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司