银离子活化过硫酸盐制备含银聚丙烯酰胺水凝胶及其性能
DOI:
作者:
作者单位:

1.东华理工大学 化学与材料学院,江西 南昌 330013;2.东华理工大学 功能有机高分子江西省重点实验室,江西 南昌 330013;3.东华理工大学 质谱科学与仪器江西省重点实验室, 江西 南昌 330013

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金地区基金资助项目(56122024,2256800);江西省面上基金资助项目(20252BAC2402 90);东华理工大学实验技术开发项目(2024013)


Preparation and Properties of Silver-Containing Polyacrylamide Hydrogel via Silver Ion-Activated Persulfate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对传统自由基聚合制备水凝胶耗时长、工艺繁琐、可控性差及产品性能单一的问题,本文基于银离子与过硫酸盐的作用机理,构建了硝酸银/过硫酸铵(AgNO3/APS)引发体系,在无外部热源和惰性气体保护下,以丙烯酰胺(AM)为单体、N,N-亚甲基双丙烯酰胺(MBA)为交联剂,通过一步法原位制备含银聚丙烯酰胺(Ag-PAM)水凝胶。结合单因素与正交设计实验,通过温度的变化考察了AgNO3,APS、AM和MAB用量对聚合过程及其对水凝胶力学性能的影响,通过抑菌圈法检验水凝胶对大肠杆菌的体外抗菌活性。结果表明,在开放室温环境下,该引发体系快速引发合成Ag-PAM水凝胶,AM和MBA分别为最大和最小影响因素,配方为AgNO3 0.680 wt‰、APS 0.912 wt‰、AM 30.0 wt%和MBA 0.123 wt‰时产品拉伸断裂应力达0.625 MPa,成胶时间和最高温度为33 min和74.4 ℃,对大肠杆菌的抑菌圈直径达(2.79±0.29)mm。银离子活化过硫酸盐体系引发自由基聚合,为水凝胶制备提供了一条操作简便、环境友好的技术路径,可有效支撑其在生物医学、柔性电子等领域的实际应用。

    Abstract:

    Conventional free radical polymerization for hydrogel preparation is generally plagued by some inherent limitations, including time-consuming initiation process, complicated operational procedures, poor process controllability, and limited functional properties. To overcome these drawbacks, this work fabricates a Siver Nitrate/Amonium persulfate (AgNO3/APS) initiation system based on the activation mechanism of persulfate by silver ions. Without heating and protective gas, Silver-loaded polyacrylamide (Ag-PAM) hydrogels are in-situ synthesized via a one-pot strategy under the open room temperature with acrylamide (AM) and N,N-methylenebisacrylamide (MBA) as the monmer and crosslinker respectively. A combination of single-factor experiments and orthogonal design is adopted to systematically investigate the effects of AgNO3, APS, AM and MBA on the polymerization by temperature of the system and the mechanical properties of the hydrogels, and the in vitro antibacterial activity of the obtained hydrogels against Escherichia coli is evaluated through the standard inhibition zone method. The experimental results show that this initiation system can rapidly initiate the synthesis of Ag-PAM hydrogels in an open environment at room temperature. AM and MBA are identified as the most and the least factors on the polymerization and hydrogel mechanical performance, respectively. Under the optimal formulation of 0.680wt‰ AgNO3, 0.912wt‰ APS, 30.0wt% AM and 0.123wt‰ MBA, the resulting hydrogel exhibits a tensile fracture stress of 0.625 MPa, with a gelation time of 33 min, a maximum reaction temperature of 74.4 ℃, and an inhibition zone diameter of (2.79±0.29) mm against E. coli. The free radical polymerization initiated by the silver ion-activated persulfate system provides a facile, friendly technical route for hydrogel preparation, which can effectively support its practical applications in biomedical engineering, flexible electronics and other related fields.

    参考文献
    相似文献
    引证文献
引用本文
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-10-22
  • 录用日期:2026-09-21
  • 网络出版日期:2026-11-06
  • 在线发布日期:
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司