基于乙烯胺酯动态键自修复木器涂料的制备与性能
作者:
作者单位:

东北林业大学 材料科学与工程学院,黑龙江 哈尔滨 150000

作者简介:

通讯作者:

中图分类号:

基金项目:

黑龙江省重点研发计划项目(2023ZX02B02);黑龙江省科技创新基地项目(JD25A004);国家级大学生创新训练计划项目(202510225308)


Preparation and Properties of Self-Healing Wood Coatings Based on Vinylamine Ester Dynamic Bonds
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文以甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)和乙酰乙酸甲基丙烯酸乙二醇酯(AAEM)为单体,通过自由基共聚制备水性聚丙烯酸酯乳液,进一步引入4-乙烯基苯胺(VA)与AAEM侧链的乙酰乙酰基反应,成功得到含乙烯胺酯动态键的可UV光固化改性乳液。以该改性乳液为基体树脂,添加季戊四醇三丙烯酸酯(PETA)作交联剂,经UV光固化制得具备自修复功能的涂膜与木器漆膜。利用红外光谱证实乙烯胺酯动态键的形成,系统研究了AAEM与VA摩尔比对涂膜动态力学性能及自修复行为的影响。结果表明,当nAAEM:nVA=4:3时,所得涂膜与木器漆膜的综合性能最优:涂膜5%热失重温度为285.68 ℃,拉伸强度为12.28 MPa,80 ℃下经过1 h后断裂修复率高达90.6%;漆膜附着力达0级,光泽度为57.89 GU,铅笔硬度达4H。该水性聚丙烯酸酯木器涂料在保持良好热稳定性与力学性能的同时,展现出优异的本征自修复能力,其附着力、铅笔硬度、耐水性等关键性能均达到或超过国家相关标准要求,具有广阔的应用前景。

    Abstract:

    Methyl methacrylate (MMA), butyl acrylate (BA), and acetoacetoxyethyl methacrylate (AAEM) were employed as monomers to synthesize a waterborne polyacrylate emulsion via free radical copolymerization. 4-Vinylaniline (VA) was subsequently introduced to react with the acetoacetyl groups on the side chains of AAEM, successfully yielding a UV-curable modified emulsion containing dynamic vinylamine ester bonds. Using this modified emulsion as the matrix resin and pentaerythritol triacrylate (PETA) as the crosslinking agent, self-healing coatings and wood paint films were prepared through UV-induced curing. The formation of dynamic vinylamine ester bonds was confirmed by FT-IR. The influence of the mole ratio of AAEM to VA on the thermomechanical properties and self-healing behavior of the coating was systematically investigated. Results indicate that the optimal comprehensive performance was achieved at nAAEM:nVA ratio of 4:3. The corresponding coating exhibits a 5% mass-loss temperature of 285.68?°C, a tensile strength of 12.28 MPa, and a remarkable fracture healing efficiency of 90.6% at 80?°C after 1 h. The resulting wood paint film demonstrates adhesion rating of 0, a gloss of 57.89 GU, and a pencil hardness of 4H. This waterborne polyacrylate wood coating maintains good thermal stability and mechanical properties while exhibiting excellent intrinsic self-healing capability. Its key performance characteristics, including adhesion, pencil hardness, and water resistance, meet or exceed the relevant national standards, indicating broad application prospects.

    参考文献
    相似文献
    引证文献
引用本文
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-10-31
  • 录用日期:2026-04-01
  • 网络出版日期:2026-09-30
  • 在线发布日期:
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司