Abstract:The development of polyimide-based photosensitive resin that can be molded by UV curing greatly increases the processing freedom of material. Polyimide-based photosensitive resins have great potential as low dielectric material in the field 5G communication. To design the structure of polyimide, hydroxyl groups, ether bonds, trifluoromethyl groups, and diazanaphthone structures were introduced into its chains to improve its solubility while maintaining good heat resistance. The hydroxyl-containing polyimide was further grafted with acrylate groups by chlorination reaction to obtain photosensitive polyimide (PSPI). For obtaining a photosensitive resin system, PSPI was compounded with diluted monomers, initiators, and other components. Then, the effect of PSPI content on the comprehensive performance of the series of photosensitive resin curing films was explored. The results show that PSPIs possess good heat resistance and mechanical properties. The glass transition temperatures (T g ) of PSPIs ranges from 181 ℃ to 198 ℃, the tensile strength ranges from 53.75 MPa to 62.61 MPa, and the elongation at break ranges from 6.93% to 10.42%. Meanwhile, the dielectric constant and dielectric loss (@20 GHz) are as low as 2.52 and 0.0110, respectively. The results indicate that there is a great potential for such novel polyimide-based photosensitive resins.